usage:
The input is connected to ordinary PD or DC power supply
The power must be greater than or equal to your desired output.
C1 port buck-boost, C2+A port pure buck.
C1 and C2+A are independent of each other and can be fast-charged by two channels at the same time.
C2 and A share one way, and only 5V2.4A slow charge is inserted at the same time. Use a C2 or A alone to support fast charging.
If you want to double-hundred output power supply voltage, you need 22V+.
16-21V input, C1 default output 100W, C2 default output 15V3A MAX.
10-15V input, C1 default output 65W, C2 default output 12V3A MAX.
You can set 10-15V input, and C1 also boosts the output to 100W. See the table below for the setting method.
Output various fast charging protocols to charge mobile phone books and other things.
The indicator light is red, power-on, green, standby, blue, and fast charging.
After work, short press the button to turn on and off the machine.
Performance parameters:
Volume weight: 63*46*19mm 73g
Input interface: DC5.5*2.5mm+USB-C
Input protocol: DC+PD2.0
Input voltage: 10-26V
Output voltage: 3-21V
Output current: 5A*2 max
Output power: 100W*2 max
Output ripple: 200mV max
Static power consumption: 6mA max
Conversion efficiency: 24Vin20V5Aout 98%
System setting method: press and hold the button and then plug in the power, the colorful flash is released and set by hand
Always On Default Flashing Comment
Red Turn on immediately, delay 10 seconds, delay turning on after power-on, to avoid voltage instability when starting the car
Yellow 10V undervoltage 11V undervoltage Undervoltage protection voltage, stop working below this voltage
Green C1-65W C1-100W Limit C1 output power when input voltage is lower than 16V
Green C1-PD3.0 C1-PD2.0 Switch the PPS broadcast of C1 port to be compatible with notebook or PAD fast charging
Blue C1-PD C1-USB Switch the PD broadcast of C1 port to be compatible with VOOC or SCP fast charging
Purple C2-PD3.0 C2-PD2.0 Switch C2 port PPS broadcast to be compatible with notebook or PAD fast charging
White Power Follow Maximum Power When PD is input, the C1 port broadcast power follows the input power to avoid deadlock
Black Long press to save and exit Short press to switch to off, long press to save and exit
Short press to switch the machine: When the green light or blue light is on during normal operation, short press the button to switch the machine on and off.
Detect battery voltage: Press and hold to display the current voltage during normal operation:
<11.5V red; 11.5-12V yellow; 12-12.5V green; 12.5-13V blue; 13-13.5V blue; 13.5-14V purple; >14V white. It will restart after testing.
Output compatible protocols:
Note: Do not touch back for the following reasons:
There is no guarantee that a certain charging power will be reached, such as 65W, especially Xiaomi OV and Huawei. Because the design of mobile phones is such a false standard, the peak value cannot reach this power, let alone continuous, it has nothing to do with me, more Not to mention that various mobile phone manufacturers are crazy about blocking and speed-limiting third parties, entangled in power and begging not to buy them, begging to buy original mobile phone chargers, and finding fault with mobile phone manufacturers. Think about shooting again
It is not guaranteed to be absolutely compatible with a certain protocol, especially the new mobile phone that is converted to 40w66w fast charge and after OnePlus 10.
The industrial aluminum profile shell has many scratches, flaws, bumps and watermarks. Please detour for obsessive-compulsive disorder, and do not touch back on the grounds of appearance flaws.
Afraid of incompatibility, it is recommended to buy freight insurance to avoid losses. For the first case that can be returned, the actual photos of the specific model of the incompatible mobile phone must be given.
I&x27;ll add to the list of incompatibilities below. Existing models in the list are not used as a reason to withdraw.
Not compatible with any V1V0-1Q00 fast charge
Not compatible with any Xiaomi full-speed fast charge, actually only up to 18-27-45w
Not compatible with any mobile phone
Incompatible with any conversion to 40w66w, please don&x27;t buy it for the sake of fast charging
Not compatible with OnePlus 10P
The self-consumption power is less than 6mA, and there is no bug that the static power consumption of the load is not reduced when the load is unplugged.
If you plan to charge it into a 40w or 66w mobile phone, compatibility is not guaranteed. Both versions do not support Xiaomi fast charging. You can purchase shipping insurance on demand, and the shipping fee will not be refunded if you return it.
The compatibility of C1 port charging VOOC and SCP is not guaranteed. These two protocols are not officially compatible with the C port. Although they can be output, the mobile phone may not apply. According to netizens testing, shutting down and then plugging in the charger can trigger fast charging. In addition, due to the emarker limit, the maximum can only be 5a.
To use VOOC or SCP for the C port version, you can use the C to A OTG head to convert it to the A port, and then use the A to C cable to plug in the phone to charge.
OV OnePlus to see the current: input *899 *800 *808 on the dial interface and select Manual Test - Device Debugging - Charging Test - SuperVoocCharger. After entering, it will be displayed as shown in the figure. Quick charge will not be displayed when fast charging because this is vooc not warp but it has been fast charged, vooc and warp just show the same compatibility at different speeds.
The original and first SW2305 path-free MOS-free sampling resistor avoids the problem of common ground, greatly optimizes the circuit to improve efficiency and increase stability, and the copycat does not write out the execution of the whole family.