parameter nameParameter valueSummaryModule modelKDT7178[Domestic H17178 program, instead of TPS61088]Module typeDC DC non-isolated boostInput voltage3V-12V(Commonly used for 3.7V lithium battery input boost)The output voltageAdjust between 4.5V- -20VThis module has its own potentiometer, and the voltage output is ADJOutput currentThe peak value is greater than 5A.Continuous stable current 3AConversion efficiencyThe highest measured 95%Mostly around 90% efficiencyInput and output pressure differenceBoost power supplyThe input must be lower than the output, please let the buyer know.Output PowerMaximum recommended value 30WTypical 12V@3A load testHello Elena±0.5%Voltage regulation rate±1%Module static power consumptionAround 2mAoperating frequency600KHz(Please note that in the small signal application, self-assess whether there is any impact)Module ripple outputBetter than 50mV(12V@1A load test)Module protectionNo external reverse connection protection, no external fuse protection, please consider yourselfModule weight6.88gModule specifications35X25X5.8Length X Width X Height (mm)Module heatNo additional heat dissipationModule working temperature-40C-- +85'CRight industrial grade, the higher the load, pay attention to heat dissipationOther features of the moduleWith output LED indicator. The module can be assembled with a patch and the bottom is flatModule interfaceWith enable port, this solution can completely turn off the output