Product introduction: This bracket can install motherboard and hard disk at the same time, suitable for ITX/MATX/ATX motherboard; can install up to 10 hard disks, with 2.5-inch hard disk and 3.5-inch hard disk screw hole, can install 2.5 inch at the same time and 3.5-inch hard drive to meet your needs. Line slot design, wire links are not confusing Transparent acrylic material, high value, friends can DIY lighting, better effect; 4.5mm thickness, sturdy and durable.The new fan stand is equipped with three 8cm fans for better heat dissipation
1.Name: Motherboard hard disk combination bracketMaterial: AcrylicColor: transparentAfter assembly size: 329mm*244mm*109mmThickness: 4.5mmMotherboard: ITX/MATX/ATX motherboardHard disk capacity: 10 3.5-inch hard drives or 2 3.5-inch hard drives and 8 2.5-inch hard drives (Note: not equipped with 2.5-inch hard drive screws)2.Name: Open ATX rack(power model)Material: 4.5mm acrylicColor: transparentDimensions after installation: 330 (L) x257 (W) x116mm (H)Installation parameters:Motherboard: Support ITX / MATX / ATX motherboardGraphics card: 7 graphics posts, support discrete graphics, no height and length restrictionsRadiator: 120mm / 240mm water-cooled integrated radiator can be installed.Hard disk: 4 hard disk positions, support 2.5-inch / 3.5-inch hard disk (10 hard disks can be installed without power supply)With a hard disk fan position, an 8cm fan can be installedPower supply: Support ATX / SFX power supplyNote: This product is a DIY product, you need to assemble it yourselfIt only sells brackets, not including the motherboard, graphics card, hard drive, power supply, etc. in the picture.3.Name: Open ATX rack(power model-UP)Material: 4.5MM transparent acrylic, 15MM aluminum alloy pillarSupport motherboard: ITX/MATX/ATX motherboardDimensions: 330x260x120mmSupport hard drives: 4X 3.5-inch hard drives or 3X2.5 hard drivesSupport power supply: ATX/SFX power supplySupport discrete graphics card, graphics card has no size limitRadiator: Reserve a 12cm fan/120 water-cooled radiator.Package:Ordinary version: bracket x2, set of screw copper column, foot pad x6.Fan models: bracket x2, set of screws and copper posts, foot pads x6, fan bracket x3 pairs,8cm fan x3.Power model: 1 set of main body plate, 1 set of installation accessories, Graphics pillar x7,8cm fan x1Power model-UP: 1 set of main body plate, 4 x 15mm aluminum alloy pillar ,1 set of installation accessories, Graphics pillar x7,8cm fan x1Note: The hard drive and motherboard are not included.4. Product Name: LV-02 Aluminum ATX Open CaseSuitable for motherboard: suitable for ATX motherboardPCIE bit: 7 graphics columnsPower supply position: ATX standard power supplyHard disk location: 7 hard disk bits (2.5-inch/3.5-inch hard disk universal)Fan position: 2 top 12cm fan positionsAccessories: screw pack x1/graphic card column x7/motherboard positioning board x3/hard disk board fixing x1/power supply fixing board x1/switch panel x1/fan board x1Other accessories: (optional)Dual USB3.0 data cable (line length 30cm), 16mm metal illuminated switch (line length 30cm)Dimensions after assembly: 265mm x 365mm x 391mm Package:without USB switch: Empty casex1The installation of water cooling requires the purchase of a water cooling radiator bracketNote: This bracket needs to be installed by DIY components. You can adjust the position according to your preference. The motherboard, graphics card, hard drive and power supply in the picture are for display only.This product will update accessories from time to time