Name: ITX Mini Transparent Case
Chassis style: vertical / horizontal
Material: Acrylic
Color: Transparent
pattern:A/B/C/D/E
Applicable motherboard: ITX motherboard
Size: As picture
Compatible power supply: DC-ATX power module / PC power supply
Hard disk station: 2x2.5 inch hard drive
High heat dissipation limit: CPU heat sink ≤27mm (Can not install 37mm radiator)
Accessories: Opening *1, HDD LED light *1, screw *1 set
Note: The memory is in front and on the side, the memory will conflict with the light, please be careful
The motherboard and power supply are not included. Only sale the case.
? Please tear off the kraft protective layer when installing
Option
ITX CASE: Only included the ITX case not Motherboard and DC PSU
CASE AND PSU: Including the ITX case and DC PSU not Motherboard
ITX CASE With 12V RGB :Only included chassis and RGB light with controller.not motherboard
?Please regard, please tell me what pattern you like.If not, I will send E pattern.
?Product Display
Pattern(In the figure, in order to see the pattern, the protective film is not peeled off, and the actual color is transparent):
Case with RGB light:
Installation steps
1. Fix the screws and short copper posts to the screw holes on the main board.
2. Align the screw holes of the main board with the screw holes of the short copper post, and then tighten the screws.
3. Fix the screws and copper posts to the screw holes around the bottom plate of the chassis.
4. Install the power switch on the front panel; install the hard disk on the side panel (the position of the hard disk should be determined according to the space after the motherboard is installed. If the space is sufficient, 2 hard disks can be installed.
Mounted on 2 side panels)
5. Insert the four panels into the slot into the bottom plate.
6. Align the side panel clips, cover the top plate, and finally secure with screws.