6S 10A LiFePO4 3.2V BMS/PCM/PCB battery protection circuit board for 6 Packs 18650 Battery Cell with temperature
Features:
1) high-accuracy voltage detection circuit;
2) terminal of the charger using high voltage device;
3) Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit);
4) MOS transistor can control the battery charge and discharge;
5) low standby current consumption.
Parameter:
over charge: 3.75V
over discharge: 2.1V
charge voltage: 3.65V * 6 = 21.9V
continuous work current: 10A
over current: 50A
balance voltage: support
balance current: support
temperature switch: support
size: 70mm * 60mm * 9mm
![](https://ae01.alicdn.com/kf/H665c0fccd4304155a40a7d3b92f1b691h.jpg)
Wiring diagram
B+ charge/discharge positive
P- charge/discharge negative
charge: B+ and P-
discharge(load): B+ and P-
![](https://ae01.alicdn.com/kf/H3d5f9dba3d8b4ccba85ee9142e913ec9u.jpg)
Applications:
6S lifepo4 Rechargeable batteries
Notice:
1. Please pay attention to the use condition of input and output voltage and load current , make the protective plate within the power consumption of no more than specification allows power consumption;
2. Connect the battery will happen cannot discharge status, in this case, connect the charge can be restored to normal working state;
3.If a set of batteries with over-discharge and over-charge cells, the bms cannot be charge and discharge.
![](https://ae01.alicdn.com/kf/HTB1xcaPLXXXXXagXXXXq6xXFXXXJ.jpg?size=70130&height=375&width=500&hash=2a614d875d4b1cf945cab159d4049fad)