Product specifications, the original production, quality assurance In-kind shooting, absolutely fidelity
This section with treble, the thickness of only 8.2mm, length 82mm, width 22mm, MINI lighter than you use some Fresh market, welcome to buy
Ribbon Tweeter band tweeter
RMS Power: 10W
Maximal Power: 20W
Rated Impedance: 6Ω
Front Panel Material: High-end NASA imported ABS panel
Diaphragm Material: the United States imports KAPTON
Conductive Line Material: Japan Aluminum foil
Magnet Material: Hengdian East magnet N45-Neodymium
Terminals Type: Plug
Lowest Recommend Crossover: ≥4k Hz
PARAMETERS
Re: 5.6Ω
Sensitivity: 86dB
FrequencyRange: 4k Hz-40k Hz
What is a Ribbon treble?
Traditional dome-type tweeter speakers, the voice coil indirectly driven vibration surface, the response is prone to a variety of peaks and valleys, while being limited by the physical properties of the material, it is difficult to replay the high sound pressure.
Tape speaker voice coil directly on the diaphragm surface, you can synchronously drive the air. Fast response, reduce distortion and uneven frequency response, the sound is accurate, clean, diaphragm US imports of ultra-thin Kapton material, voice coil and Vibration film together, the voice coil aluminum conductive film lines accounted for more than 90% of the diaphragm surface.
Compared to conventional dome tweeters, the vibration quality of the vibratory system is almost negligible, at 25 mg, Which is one-fiftieth the diaphragm mass of a conventional tweeter, meaning that for any incoming transient signal the ribbon treble Ribbon Tweeter Transient response can be almost instantaneous, excellent transient characteristics.
The diaphragm is tensioned by two glass fiber brackets and is precision mounted on two layers of NdFeB magnets to form a push-pull drive. A sound-absorbing material is filled between the diaphragm and the steel plate so as to increase the damping behind the diaphragm and eliminate Additional vibration, there is no resonance in the working frequency band, the impedance curve is a straight line.
2PCS Speaker
?
What is a treble?
Traditional dome-type tweeter speakers, the voice coil indirectly driven vibration surface, the response is prone to a variety of peaks and valleys, while being limited by the physical properties of the material, it is difficult to replay the high sound pressure.
Tape speaker voice coil directly on the diaphragm surface, you can synchronously drive the air. Fast response, reduce distortion and uneven frequency response, the sound is accurate, clean, diaphragm US imports of ultra-thin Kapton material, voice coil and Vibration film together, the voice coil aluminum conductive film lines accounted for more than 90% of the diaphragm surface.
Compared to conventional dome tweeters, the vibration quality of the vibratory system is almost negligible, at 25 mg, Which is one-fiftieth the diaphragm mass of a conventional tweeter, meaning that for any incoming transient signal the ribbon treble Ribbon Tweeter Transient response can be almost instantaneous, excellent transient characteristics.
The diaphragm is tensioned by two glass fiber brackets and is precision mounted on two layers of NdFeB magnets to form a push-pull drive. A sound-absorbing material is filled between the diaphragm and the steel plate so as to increase the damping behind the diaphragm and eliminate Additional vibration, there is no resonance in the working frequency band, the impedance curve is a straight line.