3Pc Auto Car Refill Cooling Pumps Kit Universal Radiator Set Vacuum Pump Coolant System Antifreeze Injector Vacuum Pressure Pump
Product description
The 3-piece antifreeze replacement tool for automobiles is a set of precision machining, accurate measurement, and easy to operate. It is suitable for a wide range of automobiles.
Instructions for use
1. Open the water tank. Before opening the tank cover, make sure the tank is cool.
2. Select the water tank probe of the appropriate car series.
3. Tighten it to the water tank and check the rubber ring for complete compliance.
4. Insert the quick connector into the tank probe.
5. Take out the hand pressure pump set, pressurize until the pressure indicates that the indication reaches about 15~20psi (or
1Bar).
6. Check the pressure gauge.
6.1 Assuming that the pointer of the pressure gauge remains unchanged for several minutes, it means that the system can be used normally
of.
6.2 If the pointer goes down, it indicates a crack in the system due to pressure damage
6.2.1 Check whether there is water leakage in each pipeline of the water tank, and repair it according to the location of the leakage.
6.2.2 Check the condition of the rubber ring.
6.2.3 Re-test to ensure that the repaired system can be used normally.
7. After the test is completed, release the pressure from the pressure relief valve to the pressure gauge returns to zero.
8. Before using the collection:
8.1 Insert the water tank probe into the quick head, pressurize it several times, and remove the residues in the hand pump group tube
When the water vapor is discharged, it can be stored.
8.2 Pneumatic oil is injected into the air inlet hole at the rear of the hand pump group to lubricate the piston in the pipe. again
Insert the water tank probe into the quick, pressurize several times, and drain the residual gas and oil in the hand pump group pipe.
out to collect.
Box size: 340*240*85MM
Gross weight: 1.5KG
Safety Warnings and Precautions:
●This product is only used for pressure leak detection of water tank, please do not move it for other purposes.
Warning When using the product, please strictly follow the relevant authorities and general factory regulations to ensure
Health and Safety.
●Warning Before opening the tank cover, make sure the tank is cool.
●In order to keep the product in the best and safe condition, it must be kept in good condition and clean. If the product
If there is any damage, do not use it.
●When using the product, do not wear watches, jewelry or loose clothing.
●Operate the leak detection unit and vehicle with good ventilation to avoid inhalation of gas.
●Do not smoke when operating the leak detection unit.
●Please keep all products and accessories in use away from the engine, and do not leave the products in the engine
●When storing any product and accessories, be sure to put them in the suitcase.
Important:
Please refer to the instruction manual or manual provided by the original car manufacturer to ensure the operation procedures and information.
This operation is used for guidance only.
After sales
If you want to know more about the product, you can contact our store customer service staff for consultation, and we will arrange professionals to answer you as soon as possible.