Hubs Bearing Guide
The hub is the central part of your bike&x27;s wheels (front and rear), which connects to the wheel&x27;s rim via the spokes and through which the axle is fitted, enabling the wheel to freely spin on two sets of bearings.
As bikes have front and rear wheels, so too have they front- and rear-specific hubs. The front hub is simply designed to enable the wheel to spin, while the rear hub is a little more complex as it also forms part of the bike&x27;s transmission ? the cassette or sprocket which drives the rear wheel is attached to the rear hub, which on most bikes also features mechanism to allow you to coast or freewheel (exceptions being fixed-gear or &x27;fixie&x27; bikes and track bikes).
Your wheels spin more than any other part of your bike. Therefore, having the best bearings in this application is crucial to producing the best results.
DETAILS
Item: 27537-2RS
Closures: 2RS Sealed
Structure: Ball Bearing
Dimensions: 27.5 x 37 x 7 mm
ID (inner diameter): 27.5 mm
OD (outer diameter): 37 mm
Width: 7 mm
Quantity: 1 Lot = 1 PC
A Special Structure
Besides the patch where your tires meet the road, what&x27;s the next spinning component that can either slow you down or let you roll faster?
You would be correct if you said hubs, but that component would be more accurately described as the bearings inside.
And if you&x27;ve put this Hub Bearings ABEC-3 bearings inside, you&x27;ve just upgraded your hub to another level.
Accurately ground and polished to ABEC-3 Precision Tolerances,
Grade10 Steel Balls roll with less resistance guided by a special retainer.
Rivet-Type Cage keep them rolling with the least amount of drag or resistance.
LLB seals keep the dirt out and the Low Noise Grease inside with the V-Groove Sealed design.
Runs fast with ultimate protection for long runs in between service.
Upgrade your bike with something you can actually feel makes you go faster.
We provide a variety of pivots bearings, more information please contact us. Best Regards, FUSHI BEARING