【Product Details】
The LINEPAUDIO PHONO preamplifier adds a phonograph function to any amplifier or receiver that has a spare auxiliary level input.
Prephonograph signal amplifier with AUX input and volume control, AUX has no signal amplification function.
Phono preamplifier adds phonograph function to any amplifier or receiver with spare AUX/CD/DVD audio line level input.
It can also be used to drive the disc directly into a mixer or computer sound card. With its precise RIAA balance and 80 dB signal-to-noise ratio, this product can also be used to directly input the turntable into the sound system of a mixer or computer. In order to switch the auxiliary input to replace the stereo or computer use, the need to connect and disconnect the source signal and the product to share the connection is eliminated. The sound quality of the preamplifier can easily match or exceed the sound quality of the phonograph preamplifier built into the high-quality stereo component.
The product configuration switch function selects the AUX input instead of the stereo or AUX input port occupied on the computer. There is no need to connect or disconnect the shared input signal source of the product.
The output level control is very convenient to use the sound card, and can eliminate the largest signal difference between the switching signal sources.
【Features】
High-quality RIAA phonograph preamplifier for dynamic magnetic jukebox.
Accurate and stable integrated circuit design.
The input and output of the gold-plated magnetic head are connected to the RCA port for reliable performance.
The stylish, sturdy metal casing can increase the resistance to electrical noise.
The output level control allows the volume to be adjusted to provide signals from other sources.
Distortion rate: 0.06% (maximum).
The frequency response is: + / -0.5dB, 20Hz -20kHz.
The input impedance of the phonograph: phonograph: 47K ohm-200pFnominal.
Line input impedance: AUXL: 10 K ohms.
Output impedance: 200 ohms.
Channel spacing: 50 dB.
Sound: 40dB (Phono) any signal source.
Sound sensitivity: 3.3 MV.
Output: 300 MV.
Signal to noise ratio: 85 dB
Power supply: DC 12V 1A.
Product net weight: 329g.
Weight after packaging: 580 grams.
Product size: length 135mm x width 75mm x height 45mm.
Packing size: length 200mm x width 180mm x height 55mm.
【packing list】
1X PHONO phonograph signal amplifier with auxiliary input and volume control.
1X110V-240V DC12V power supply (line length is 100CMN),
1X stereo RCA to RCA wire gold-plated interface (wire length is 50CMN),
1X 3.5mm stereo RCA wire gold-plated interface (wire length is 20cm).