RISK RL217 RISK Bicycle Internal Cable Routing Tool
Manual Included
Highlights 1: Rubber coated steel rope. .
Rubber coated steel rope can protect your paint
Highlights 2: Quick traction rubble adaptor
Forφ4-5.5mm cable, hydraulic brake hose, Di2 E-tube,RISK uses a quick traction rub ble adaptor with
quick-release design. It is convenient and practical
★When the threading situation is complicated and the quick traction rubble adaptor is not competent, please use the metal traction joint
Long rope
Hydraulic hose connector
Ca ble/hydraulic brake hose
Note: After the hydraulic brake hose is installed, 10mm of the end of the cable should be cut off to prevent oil leakage.
Long rope
Inner line connector Di2 E-tube connector
Shift/Brake inner line
Long rope
Inner line connector
Di2 E-tube connector
Di2 E-tube
Guide main magnet + short magnet guider, can solve the problem that the traction rope is difficult to pull out at the hole.
Caution:
1. This internal cable routing tool is not suitable for steel frame.;
2. Only applicable to frame with threading aperture ≥ 6mm;
3. Use the brake hose metal joint, after threading, 10mm of the end of the cable should be cut off to prevent oil leakage.
4. There may be fragmentation due to strong magnetic collision, please pay attention to protection to avoid injury
For other matters, please refer to the instruction manual
Highlights Design 4: Plastic Storage Box