Welcome to our store.
We are Shenzhen Hi-Link Electronic co.,ltd,manufacturer of WIFI module and AC DC power module products in China for ten years.
If you need samples for testing, please place order here directly.
If you need more quantity, welcome to contact us, we will give our best price to you.
Choose us with high quality and favourable prices.
1. Introduction:
Hi-Link 5V 1.2A output dc dc power supplies 18-36V Input HLK-6D2405AH 85% efficiency isolated dc dc power module
6WH DC / DC series power module products output power is 6W, 2: 1 wide voltage input range, efficiency up to 85%, 1500VDC conventional isolation voltage, allow working temperature -40 ℃ to + 85 ℃, with output overvoltage,overcurrent, short circuit protection functions are widely used in medical, industrial control, power, instrumentation, communications, railway and other fields.
(MODEL) | Size (mm) | Output power (W) | Output voltage (V) | Output current (mA) |
Notes |
HLK-6D2403AH | 25.4*25.4*12 | 6 | 3.3 | 1500 | 1800uF |
HLK-6D2405AH |
| 6 | 5 | 1200 | 1000uF |
HLK-6D2409AH |
| 6 | 9 | 667 | 470uF |
HLK-6D2412AH |
| 6 | 12 | 500 | 470uF |
HLK-6D2415AH |
| 6 | 15 | 400 | 220uF |
HLK-6D2424AH |
| 6 | 24 | 250 | 100uF |
2. Product Characteristics
1.Ultra wide range input（2:1），output 6W
2.Conversion efficiency 85%（Typ）
3.Isolation voltage 1500Vdc
4. Super fast startup： 100mS（Typical value）
5. range of working temperature：-40°C~+85°C
6.Output short circuit protection, overcurrent protection, overvoltage protection
7.Metal case, low output ripple
8. International standard pins, PCB board in-line installation
9.Adopt high-quality environmentally friendly waterproof and thermally conductive adhesivepotting, moisture-proof, vibration-proof, meet the waterproof and dustproof IP65
10.High reliability, long life design, long continuous working time
3. Environmental conditions
Project name | Technical index | Unit | Notes |
Working temperature | -40?+85 | ℃ |
|
Storage temperature | -55?+125 | ℃ |
|
Relative humidity | 5?95 | % |
|
Heat dissipation method | Natural cooling |
|
|
Atmospheric pressure | 80?106 | Kpa |
|
Vibration | Vibration coefficient: 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes |
| Meet secondary road transport requirements |
Items | Working conditions | Unit | Notes |
Rated input voltage | 24 | Vdc |
|
Input voltage range | 18-36 | Vdc |
|
Input current | ≤0.4 | A |
|
Reflected Ripple Current | 20 | mA | DC24VRated input voltage series |
Impulse voltage | ≤50 | Vdc |
|
Starting voltage | 18 | Vdc |
|
Input undervoltage protection | 15.5 | Vdc |
|
Input filtering type |
| PI |
Hot plug |
| not support |
Remote（Ctrl）* | Module is on |
| -- |
| Module Gate |
| -- |
| Input current at shutdown | mA | -- |
Notes: Test at room temperature
5.Output characteristics(5V/1200mA)
Project name | Skills requirement | Unit | Notes |
No-load rated output voltage | 5V±2% | Vdc |
|
Short time maximum output current | ≥1300 | mA |
|
Rated output current | 1200 | mA |
|
Voltage regulation | ±0.5 | % |
|
Load Regulation | ±1 | % |
|
Conversion efficiency | Vin=24Vdc，Output full load82 | % |
|
Output ripple and noise(mVp-p) | ≤85 Pure resistive load, 20MHz bandwidth, peak-to-peak | mV |
|
Output voltage regulation | ---- | - | No regulating end |
Output overcurrent protection | Output maximum load110-190% | A |
|
Output short circuit protection | Direct short circuit during normal output, and automatically resume normal operation after short circuit is removed |
| Does not damage the entire machine |
Output overvoltage protection | Output maximum voltage110-160% | Vdc |
|
Insulation voltage | Input-output, test time is 1 minute, leakage current is less than 1mA/1500V | - |
|
Insulation resistance | Input-output, insulation voltage500VDC/1000MΩ | MΩ |
|
Isolation capacitor | input Output，100KHz/0.1V 1000pF | - |
|
Note：① For product models with output voltages of ± 5VDC and ± 9VDC, the maximum output voltage accuracy is ± 5% under 0%-5% load conditions; ② When tested under the working condition of 0% -00% load, the index of load adjustment rate is ± 5%; ③ 0% -5% load ripple & noise is less than or equal to 5% Vo. Ripple and noise test method Twisted pair test method, can add a capacitive load to the output end to reduce light load ripple.
|
6. Derating curve
7.Typical application circuit
Our Services & Strength
1.We are the manufacturer . Can offer bottom price .
2.We only sell what we developed , can offer technical support for each item .
3.11 years of export experience.
