How to connect by 2.4G and Bluetooth?
2.4G model
1.Plug in Rapoo receiver.
2.Turn on the mouse.
Bluetooth model
A:Pair your first device
a1.Turn on the mouse
a2.Keep pressing the Bluetooth button at least 3 seconds to pair.
The status LED flashes red slowly.The mouse is discoverable for 2 minutes.
a3.Complete Bluetooth pairing on your device:
Windows 7 and 8:
(1) Click the "Start" button, then select Control Panel>Add a device.
(2)Select "Rapoo BT3.0 Mouse" or "Rapoo BleMouse" from the list, then click next.
Windows 10:
(1) Click the "Start" button, then select settings>Devices>Bluetooth.
(2)Select "Rapoo BT3.0 Mouse" or "Rapoo BleMouse" from the list, then click Pair.
When the mouse and device are paired, the light turns off.
B:Pair your second device
b1.Press the Bluetooth button to switch to another channel.
Keep pressing the Bluetooth button at least 3 seconds to pair.
The status LED flashes red slowly.The mouse is discoverable for 2 minutes.
b2.Follow the step a3 of "Pair your first device" to complete Bluetooth pairing.
Switching among paired devices
When you switch to the 2.4 GHz device, status LED off.
When you switch to Bluetooth device 1 or 2, red light rapidly flashes, respectively.
Low battery
Red light rapidly flashes twice every two seconds when you use the mouse.
System requirements
Windows XP/Visa/7/8/10 or later,MacOS
FAQ:
The device is not working?
1. Make sure the device is turned on.
2. Make sure the receiver is plugged into the PC&x27;s USB port.
3. The PC can not recognize the receiver, please re-plug the receiver.
4. Check if the battery is installed correctly and re-install battery.
5. If the problem has not been solved, download the pair program from http://www.rapoo.cn/downloadcenter, then repair the connection.
6.Please free to contact us if you can&x27;t solve problem or you want to ask any problems, we will try to reply you within 24 hours.
How to download multi model pairing software from Rapoo webside?
Click (http://www.rapoo.cn/downloadcenter)
How to pair mouse by software?
Mouse Pairing:
Notice:
A. Make sure PC&x27;s USB port is working;
B. When the mouse pairing, please keep the wireless receiver and Computer and Mouse distance within 5-10 cmvery important.
C. Please move others wireless mouse and receiver when pair rapoo mouse.
Steps of pair:
1. The receiver plug to the computer&x27;s USB port, then open the pairing software, follow the prompts of the software.
2. Turn off the mouse power switch or remove the battery.
3. Use a wired mouse or laptop touchpad to click the Pair button. (Very important)
4. Then insert battery and turn on mouse quickly,Then press the mouse left and Middle and right three buttons at the same time,untill pairing successfull or failure(Checking the screen of software).
5. After the pairing is successful, re-plug the receiver and working normally.