Key Features:
1. Turn forward / backward / SWR in one button.
2. Backlit LED display for easy reading.
3. Powered by AAA batteries / external USB port.
4. Applicable battery.
5. Micro USB-DC 5V output (adapter not included).
6. Convenient control scheme for easy operation.
Features:
Frequency range: 125-525 MHz
Center calibration: 145 MHz (VHF) 435 MHz (UHF)
Power range: 0-120 W +/- 5%
Test functions: Fwd / Rev Power, SWR
Insertion loss: 0.3dB or lower
Resistance: 50 Ohm
Power supply: "AAA" battery or Micro USB port
Connector: type "M" or "N"
Size: 70 W x 78 H x 30D mm
Net weight: 228 g (without batteries)
Measurement:
1. Set the transceiver output to “TX” and the antenna or load to “ANT”.
2. Turn on "POWER" for ready to use.
3. The LCD displays both “Fwd / Rev Power and SWR” at the same time.
4. For backlighting, please switch “light” to “ON”.
Without a function for 30 seconds, the backlight automatically turns off.
After starting PTT, the backlight will return.
Installing the battery:
1. Remove the black screw from the cover to open the back cover.
2. Install 2 pcs. "AAA" batteries.
3. Can be used with alkaline or Ni-Ca, Ni-MH rechargeable battery.
4. This unit has no built-in charging circuits.
5.
6. Remove the battery if the device will not be used for a long period of time.
Pacakage: 1 PC. module
Note: Battery is not included.
Unit contains: 1 * RS50 power / SWR meter