Description:
Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with the Caddx Vista Digital HD System on it. We sticked the lighter Caddx Vista on one of our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don&x27;t worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam
HIGHLIGHTS:
5mm arm design for more durability
Easy-Swap arms
LED illuminated Logo
XING-E Pro 2207 motors and NAZGUL F5 props
5" version also fits 5.1" style propellers
Popular True-X configuration
TPU crash-guards
Fits both 30.5x and 20x stacks
Nazgul XL5 HD frame specs:
BLITZ F7 Flight Controller V1.1
BLITZ E45S 4-IN-1 45A 2-6S ESC
XING-E Pro 2207 FPV Motor(6S 1800kv )
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 400.8g (without battery)
PRE-TUNED & PRE-SETUP:
Don&x27;t worry about tuning, we did that for you already A basic PID- and Filter tuning was applied for a great flight experience
To restore lost tunes or updates, please check our linked article on"Firmware/Factory Dumps"
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn&x27;t end in a mess
Please check our linked article on"How to disable Angle-Mode, activate Acro-Mode"
Changelog:
Nazgul5 V2HD Quad BNF Included Components and Parts
Prebuilt and tested Quadcopter
1x XL5 V5 Frame
1xCaddx Polar Vista Digital HD System Kit
1x Albatross LHCP RP-SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
FC // BLITZ F7 Flight Controller V1.1
MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Dimensions: 36.5*35 mm
Weight: 7.8g
ESC // BLITZ E45S 4-IN-1 45A 2-6S ESC
Additional Suggested Parts(donot include)
DJI HD FPV Goggles
Radio Controller
Battery 4S 1550mAh
Battery 6S 1300mAh
GoPro Mounts
Important
The DJI Remote Controller is recommended for beginners since you won&x27;t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don&x27;t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.
Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter.
If you have none frsky transmitter,please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.