This version supports both QC and PD deception
This thing is a PD decoy, PD input, DC output for soldering points, PD in, PD in, plug in a PD charger, PD trigger, PD decoy, not a PD output, it’s not a PD output that can be used to charge a mobile phone by soldering a positive and negative power supply. Computer, don&x27;t buy the wrong one I said that if I understand it, I will not take any responsibility if I buy the wrong product. The return is not free, and it will not be returned or exchanged after welding.
Note that this product is one-way PD to DC, input C port plug PD power, output DC DC pad, does not support reverse use, do not buy the wrong one. If you need DC to PD, click here to buy.
A PD decoy 5V 9V 12V 15V 20V full support, hardware jumper solder point setting voltage, there is no false touch or poor contact or software crashes causing voltage errors.
Very low static power consumption of 3.5mA, even if it is plugged into the charger, it will not consume too much power. No lights and no light pollution.
Do it yourself DIY, built into various devices that require 5-20V, set the voltage, compatible with PD power supply, and get it done with a charger.
Maximum 20V5A100W support, the specific output power depends on the maximum support of the corresponding gear of the charger.
Volume: 17mm in length, 10mm in width and 4mm in thickness
Input protocol: PD2.0, PD3.0, QC2.0, QC3.0, QC4, QC5
Trigger gear: 5V, 9V, 12V, 15V, 20V, see the figure below for the specific setting method
Trigger logic: Trigger the highest PD2.0 or QC2.0 gear that is less than or equal to the set gear. If the adapter supports 5, 9, 20V, and the trigger is set to 12V, the actual trigger is 9v
Static power consumption: less than 4mA in all gears
Output pads: 4 pcs with a pitch of 2.54mm, square negative and round positive
Setting the voltage method: as shown in the figure, the red dot represents connecting the two halves of the pad with a drop of solder.
The default output is 20V. It is recommended to check the output voltage before using it.