ADSP is easy to operate and can easily control noise reduction and audio immunity with a single click. When the power is turned on to the ADSP, the red LED lights up. After initial power-up, the noise reducer enters bypass mode and the audio signal is directly connected to the noise reducer. When the primary noise reduction is enabled, the yellow LED lights up. When the secondary noise reduction is enabled, the two yellow-green LEDs illuminate. This will depend on the audio condition when no LEDs are lit.
Applicable to all types of short wave power station, the radio can meet the noise reduction and filtering under various standards
pls check work video:
https://v.youku.com/v_show/id_XMzc2MzA1MzkzMg==.html?sharefrom=iphone&sharekey=0addb365191f09cc4837c6333052156f0
Size (length, width and height): 100*90*60 (mm)
1, Audio range:
Minimum input 100 mV
Maximum input 5 volt
Output power: 5 W
Current consumption:
Idle 110 mA
Full output 500 mA
Out-of-band rejection: -45 dB
Noise floor: -60 dB
2, ADSP output connection:
The ADSP can be connected directly to the speaker or 3.5mm headphone.
?