note:
Different batches are always different
Some internal parts changes (individual capacitors, and Bluetooth modules, these will be a little different for each batch) familiar without notice
Only the cracked version of the driver can play DSD256, if you need firmware, you can send me your email,
Apple system cannot play DSD256, because it is driver-free, only the WIN system with the driver installed can play DSD256
Color Classification:
A: One decoder host
B: XLR 4-pin to 3.5 stereo plug
C: Remote control version
There is no paper manual for this product. If the manual is needed, an electronic file version is available.
The latest addition of remote control version: equipped with an Apple remote control, which can realize the full-function remote control of the whole machine (switching machine, volume, filter, input switching, mute)
The decoder adopts dual ES9038Q2M decoder chip design, supports 5 kinds of audio input, has complete functions, convenient power supply, and the sound quality is not inferior to that of a large desktop computer.
It is recommended to use balanced earphones as much as possible, use balanced to single-ended 3.5, etc., the performance of the amp will be greatly reduced
The Bluetooth antenna can be installed on the antenna base, it does not need to be tightened, otherwise it may drive the inside of the base
Rotation of the wire causes the wire to break and the signal cannot be received.
Features are as follows:
1. Touch-type power switch, and there are power-on and standby indicator lights.
2. OLED screen display, high contrast, bright colors.
3. Soft control dual 9038Q2M decoding, support digital switching input, filter format selection.
4. Balanced XLR output, balanced amp output.
5. Built-in XMOS XU208 asynchronous USB chip, with electrical isolation technology, support DSD256 hard-decoding mode, support mobile phone OTG (no guarantee that any Android mobile phone can be used, it has a lot to do with mobile phone system)
6. Built-in CSR8675 Bluetooth module, support LDAC and APTXHD Bluetooth 5.0.
7. Support IIS input, coaxial and optical fiber support DSD DOP64. (PS interface definition, see the last picture)
8. Output with mute relay DSD, PCM playback without switching noise.
9. Built-in 7 dual op amps, with sockets can be replaced by oneself (standard JRC4580*5+NE5532*2)
Technical specifications:
Dimensions: 173*110*53mm (excluding protruding parts)
Weight: 750 grams (package weight 2KG)
Amplifier power: 1.5W/32 ohms, 200mW/300 ohms (balanced 4-core to 3.5mm stereo requires impedance matching resistance)
Audio output distortion: 0.0006% (all input ports can reach)
Signal to noise ratio: 119dB
Audio output amplitude: 2V RMS (SE/XLR)
Working voltage: 5V 2A (be careful not to overvoltage)
Coaxial support format: PCM 44.1K-192K/24bit, DSD64 DOP
Optical fiber support format: PCM 44.1K-192K/24bit, DSD64 DOP
USB input support format: PCM 44.1K-384K/32bit, DSD64-DSD256 native automatic identification and decoding
Bluetooth support modes: APTX-HD, LDAC, APTX-LL, APTX-L, AAC, SBC
IIS support format: PCM 44.1K-384K/32bit, DSD64-DSD512 native automatic identification and decoding
Random Accessories:
1. One USB data line
2. A Bluetooth antenna
3. An external high-performance power supply
This product does not come with CD, manual, USB drive, player, plug-in download link:
https://pan.baidu.com/s/1Mg2dH5l7M7jF9-UW_pSqow
(If you need a cracked version of Native playback driver, please contact the owner to provide it, only applicable to systems below WIN7, and WIN10 is not supported)
It is best to use FOOBAR 2000 as the player and install the ASIO plug-in in the player to play 352.8K--384K music files. It is normal that the computer system can only display up to 192K
DSD music test file download:
DSD64: http://pan.baidu.com/s/1bnGWI2V
DSD128: https://pan.baidu.com/s/1GWZT4eP8PN_C9F0Kx76eJg
-------------------------------------------------- -------------------------------------------------- -------------------------------------------------- -----------------
Driver installation and FOOBAR player settings:
First, connect the USB cable to the computer and install the driver. This is very simple and will not be introduced.
Note: When installing FOOBAR, choose "Full Installation"
FOOBAR player settings:
1. First open the player "File-Parameter Options", click "Components" on the left, and then click "Install" in the lower right corner to install the downloaded ASIO plug-in: foo_out_asio.fb2k-component (first unzip the downloaded plug-in package ), press "OK" and restart FOOBAR, after the installation is complete, as shown below
2. Install the "ASIO Proxy Install-0.7.1.2.EXE file" in the folder "foo_input_sacd-0.7.1" in the plug-in package, as shown below
3. On the "Parameter Options" page of FOOBAR, click "Play" --- "Output" on the left, and select the output device on the right: ASIO:foo_dsd_asio, as shown below. (When the WIN10 system uses FOOABR1 .3.14, the output device selects "DSD:ASIO:XMOS USB AUDIO 2.0 ST 3004 ASIO 1.03")
4. Click "ASIO" in the "Output" drop-down menu on the left, double-click on the right: foo_dsd_asio, as shown below
After double-clicking foo_dsd_asio, the menu that pops up is set as follows and closed
5. Then click "Tools" on the left, and select "SACD Decoder" in the drop-down menu. In the right menu, select "DSD" as the first item, keep the others unchanged, and then press "OK" to complete the setting.. As shown below:
When playing DSD songs, the system volume of the XMOS sound card must be adjusted to 100 before there will be sound, as shown below