Best ELM327 V1.5 USB Switch HS MS CAN OBD2 OBDII Protocols PIC18F25K80 Chip Diagnostic Tool Code Scanner Auto Reader ELM 327 1.5
---USB ELM327 Introduction---
The Best PIC18F 25K80 Chip
Top Reasons To Get Our ELM327 USB V1.5 PIC18F25K80:
1. Firmware Version: V1.5 (Main IC PIC8F25K80, Driver IC PL2303 )
Software Version: V2.1
2. It supports CAN Protocols and most OBD2 protocols.
ISO15765-4 (CAN)
ISO14230-4 (KWP2000)
ISO9141-2
J1850 VPW
J1850 PWM
3. With Multi-Languages:
Czech, Denish,German, English, Spanish, French, Croatian, Hungarian, Italian, Polish, Serbian,Turkish No Russian Language
---USB Switch ELM327 Introduction---
Top Reasons To Get Our ELM327 USB Switch:
1. With best PIC18F25K80 Chip:
2. Add functionality for Ford cars, Even support hidden function for ford Focus Mondeo Kuga.
(Hidden function Support car list: 2006-2016 classical for Focus , 2012-2015 new for Focus , 2013-2015 Kuga)
3. Powerful Softwares Compatible: FORScan, Elmconfig, FF2 and FoCCCus,Scanmaster plus more
4. Special Design with Switch : connect different CAN buses , such as MS CAN bus and HS CAN bus
5. Drivers and instructions included,Easy to install.
6. The most stable Hardware V1.5 , Support all OBD2 Protocols
7. Supported Langauges:
-----When starting HS function, it supports 12 Languages:
English,Czech,Danish,German,French,Spanish,Hungarian,Italian,Polish,Turkish,Serbian,Croatain
-----When starting MS CAN function, it supports Language: English & Russian.
8. Supported softwares: FORScan, Elmconfig, FF2 and FoCCCus,Scanmaster plus more
9. Supported cars:
Especially for Ford, for Mazda, for Lincoln, for Mercury vehicles And other OBD2/EOBD universal car models.
10. Supported protocols:
for FORD HS CAN
for FORD MS CAN
SAE J1850 PWM(41.6Kbaud)
SAE J1850 VPW(10.4Kbaud)
ISO9141-2(5 baud init,10.4Kbaud)
ISO14230-4 KWP(5 baud init,10.4 Kbaud)
ISO14230-4 KWP(fast init,10.4 Kbaud)
ISO15765-4 CAN(11bit ID,500 Kbaud)
ISO15765-4 CAN(29bit ID,500 Kbaud)
ISO15765-4 CAN(11bit ID,250 Kbaud)
Attention:
1. CD was easily to get broken, so If your CD was broken during the delivery. Please contact us and we will give you an software download link or send the software to you through Email.
The Delivery Time always need 20-60 days. To South America, Africa, may need about 60-90days. So if your protection time expired, please contact us to extend it.
Do Not Open Dispute Or Give Negative Feedback Any Problem, Contact Us First Thanks
2. This ELM327 Scanner Only Works With OBDII Standard Protocols 12V Gasoline Cars. Do Not Work With Diesel&Trucks.
3. ELM327 can support multi-brands, we can not test on each car. If you do not sure whether it work with your car or not, please consider it or you do not buy it.
4. ELM327 USB supported PC Windows XP Only. Do Not support Other Windows System Do Not Have Bluetooth or WiFi Function.
Description:
OBD-II Software for ELM327 USB is a free program that allows you to use your PC and a hardware interface to get the information from your car&39;s computer.
The program is very user-friendly, and easy to learn. It is also very easy to install: simply extract the files into a folder on your computer&39;s hard drive, and you&39;re ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides.
Specifications:
Output protocol: RS232
Baud rate: 9600 or 38400
Indicator LEDs: OBD Tx/Rx, RS232 Tx/Rx, Power
Operating voltage: 12V, internal protection from short circuits/overvoltages
Nominal idle current: 45 mA
Support two platforms - DOS and Windows.
Software: ScanMaster-ELM, ScanTool.net, PCMSCAN
Compatible With 278 OBD-II compliant Car Models :
Works on all 1996 to 2010 cars and light trucks sold in the United States, some 1994 and 1995 models are also ok.
Installation Steps:
1. Install "ScanTool(dot)net" software from the CD
2. Connect OBDII cable to the obd port on your car.
3. Connect OBDII cable with your USB ELM327 scanner. Then power light is on, "ODB TX/RX" flashing, means connection well.
4. Use USB cable connect your ELM327 and computer. Then system will remind you "find new firmware", Install the USB driver. Enter into your computer&39;s "Device Manager", click it will find "USB Serial Port", remember the COM Number.
5. Start "ScanTool(dot)net" software. Click "ScanTool(dot)netv1.13 for windows" program, choose "options",click COM number, confirm.
6. Installation finished, you can diagnose your car now.
