The main output voltage is (± 25V, ± 30V, ± 35V, ± 40V, ± 45V, ± 50V, ± 55V, ± 60V, ± 70, ± 80V), the default is ± 55V, what voltage is required in the buyer&x27;s message to make clear , Different voltage capacitors, component parameters are different, in kind prevail.
The parameters are as follows:
Input voltage: AC200-240V
Output:; main voltage + -55V / 5.5A; independent 12V / 0.5A; auxiliary + -12V / 0.5A (with main voltage supply to ground)
Special reminder: Because the switching power supply only regulates the main voltage, the current of the independent and auxiliary output must be less than the current of the main voltage; for example, the current of the main voltage at that time was 10mA, and the auxiliary and independent cannot carry loads above 10MA.
Voltage stabilization accuracy: main no-load ± 3%, with load ± 10%; independent no-load ± 15% (when AC220V input)
Continuous power: 300W (can work continuously at 25 ℃)
Rated power: 600W (can work continuously for about 5 minutes at 25 ℃ ambient temperature, long-term work with fan cooling)
Instantaneous power: 800W (power generated during dynamic signal impact, time is less than 100 seconds)
Conversion efficiency: Max 98%
Overall dimensions: length, width, height = 96 * 96 * 38mm
Weight: 310g
The board is as follows, see the wiring diagram below: