GERMA 433Mhz Wireless Remote Control Switch AC 110V 220V 30A Relay 1CH Receiver Controller and 4botton RF 433 Mhz Transmitter
![](https://ae01.alicdn.com/kf/H949478fd54554b5b9b8a43b274a31fd06.jpg?width=960&height=87&hash=1047)
Specifications of Transmitter:
Material: Metal and PVC
Product Type: KT01-117S-4
RF Frequency: 433 MHz
Channel Supported: Four Channel
Encoding Type: Learning Code(1527), Fixed Code(2262).
Modulation System: ASK
Operating Voltage:DC 12V
Operating Current:<25mA
Transmitting Power: +13dbm
Frequency Windage: ±0.2MHz
Transmission Distance: 50m (Free Space)
Color: Black
Main Item Size: 5.4 * 2.9 * 0.9cm / 2.1 * 1.14 * 0.35oz
Main Item Weight: 26g/0.9oz
Package Size: 5.5 * 3.0 * 1.0cm /2.16 * 1.18 * 0.39oz
Package Weight: 30g/1.0oz
*Support Learning Code(1527) Common Chip, such as, PT1527, EV1527, etc. Compatible with the most of 1527 Remote Control Relay Panel.
*Stable circuit, high accurate and high-effective, individuation and humanization design, bringing you much convenient.
*Adopts imported high-frequency triode, owning 13dbm Transmitting Power.
*Easy to use: Easy to install and use, the 4 channel remote control system lets you take control of your gadgets, car and home or garage.
*Widely Use: Perfect Suitable for controlling electrically operated gate, retractable door, garage door, electric curtain automobile, motorcycle and other telecommand equipments.
![4](https://ae01.alicdn.com/kf/H7975df9af9da4b2582c7b9aaded0d9097.jpg?width=800&height=800&hash=1600)
Note: 1.This remote control only support the learning code (1527) of the receiver
2.This remote can not be programmed.
3.It will not work if you only buy the transmitter. it is parts of the remote control system, it needs work with the Remote Control Relay Receiver module to achieve controlling.
4.We don't offer retail package, but we will pack it well before shipped out.
Specifications Of The Receiver:
Operating voltage: AC 110V - 240V
Output voltage = Operating voltage
Operating frequency: 433MHz(Same with Remote control)
Encoding Type: learning code(you can buy extra 315MHz remote controllers for this receiver)
Rated contact current of relay: 15A/240VAC, 15A/110VAC (Please notice that : Although the relay is marked 30A 240VAC. The 30A is for the peak current of your load. The rated current of your load should less than 15A)
Box size: approx 65 x 45 x 28m
![](https://ae01.alicdn.com/kf/Hb32805dfebdb4786901c8cfccca1e54cj.jpg?width=1000&height=1000&hash=2000)
Operation Introduction:
About Working Mode:
Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.
Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.
Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.
Clearing the Code:
Press the Learning Button on the receivers for 8 times, the codes will be cleaned.
After cleaning the code, all the remote control cannot work any more.
Learning the Code:(Momentary)
Press the learning key on the receiver once time, it comes into momentary setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.
Learning the Code: (Toggle)
Press the learning key on the receiver twice time, it comes into toggle setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Press the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.
Learning the Code:( Latching)
Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF.
For example: Button A = ON, Button B = OFF
Press the learning key on the receiver triple time, it comes into latching mode .
Wait for a moment, the LED indicator on the receiver board will flash then come off.
Press the remote button A. LED flash for 5 times.
Press the remote button B. LED flash for 5 times
After 3 seconds, the LED indicator will be on again, learning successfully.
A = ON, B = OFF.
About Delay: 1. Learning method with a 5-second delay:
Press the controller learning button four times, the indicator light flashes four times and then press the remote control to send a code, the receiver indicator flashes three times and then the learning is successful, then press the remote control to send the code, the relay will automatically disconnect after 5 seconds of closing.
2. Learning method with a 10-second delay:
Press the controller learning button five times, the indicator light flashes five times and then press the remote control to send the code, the receiver indicator flashes three times and then the learning is successful, then press the remote control to send the code, and the relay will automatically disconnect after 10 seconds.
3. Learning method with 15 seconds delay:
Press the controller learning button six times, the indicator light flashes six times and then press the remote control to send a code, the receiver indicator flashes three times and then the learning is successful, then press the remote control to send the code, and the relay will automatically disconnect after 15 seconds of closing.
![6](https://ae01.alicdn.com/kf/Hf791e7a3d0764cbba4098043572e0f1dl.jpg?width=800&height=800&hash=1600)
![1](https://ae01.alicdn.com/kf/H3224cc478e2d4e21bbde088a2c3019ffN.jpg?width=800&height=800&hash=1600)
![5](https://ae01.alicdn.com/kf/H264fced39bb8481199c65dbe570aafe42.jpg?width=800&height=800&hash=1600)
![2](https://ae01.alicdn.com/kf/H498a8c0da9804606aec9f1777e5d7540O.jpg?width=800&height=800&hash=1600)
![](https://ae03.alicdn.com/kf/S57f66e667f1a46b3b3c71cc52247efabh.jpg)
![](https://ae03.alicdn.com/kf/S9eb77ef5f2244957940661c16ad7dc5b0.jpg)
![](https://ae03.alicdn.com/kf/Sad679285d32646b2b687062ed016f80cG.jpg)