Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned;
After clearing the stored transmitters, all transmitters will need to be relearned by the receiver.
Operating Instrution :
1. Learning the code :(momentary Mode)
Press the learning key on the receiver 1 times, Wait for a moment , the LED will be off , it comes into learning state .
Press the remote button , LED indicator on the receiver board will flash then come off .After 3 seconds, the LED indicator will be on again , learning successfully .
2.Learning the code: ( Toggle Mode )
Press the learning key on the receiver 2 times, Wait for a moment , the LED will be off , it comes into learning state .
Press the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
3.Learning the code : ( Latched Mode )
Note: When you choose for Interlocking mode , in order to learn more remote control , you need to learn two different button , the first time learn is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver 3 times , the LED (on the Receiver)will blink 3 times. When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times . Push the remote button B, Led flash for 3 times . After 3 seconds , the LED indicator will be off , Learning to succeed.
A = ON , B = OFF .
Note:
1. When the voltage of the remote control is insufficient, please replace the battery in time. (When the battery voltage of the remote control is insufficient, the remote control distance generally becomes shorter).
2. When using wireless electronic products, be careful to avoid metal masks, large electronic equipment, electromagnetic fields, etc., which have strong sources of interference, and avoid short distances between the remote control and the receiver or malfunction.