Universal Gate & Garage Door Unlocked Gate Smart Remote Control Key Cloning Gate For Garage Door/Motorcycles/Car Alarm
Features:
One to one key copy
Each key password alone save
Can continuous repetitive copy use one million times
Privacy is strong
Specifications:
Working voltage: DC12V (27A battery not include)
Operating Current: ≤ 8mA
Working frequency: 433.92MHz(Optional 315MHz)
Modulation Mode: ASK (AM)
The transmission power: ≤ 100mW
Emission Distance: 50 to 100 m (proof)
The encoding type: self Copy
The working temperature: -10 ° C to +50 ° C
Works with the following remote control IC modules (please check your original remote control before ordering),and your remotes also should be Fixed code or Learning code. 2262,2260,5026,5326,5326-3,5326-4,FP527,PT2240,EV1527,HT6010,HT6014,HT12E,HT640,HT680,PLC158,PLC008,SMC918,SMC926,PT2292,12L-4SC,HT6026, UM3750AM,etc
Uses: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products
Notice:
The essential condition for the selection of the remote control;the copyed remote control operates normal,chip is compatible and frequency is correct.
Before buying,please make sure the copyed remote control operating frequency or choose & buy the frequency adjustable type remote control.
Before buying,please confirm whether your remote control can be copyed or not.
Our remote control can copy the fixed codes and learning codes
rather than stealth codes.It can&x27;t copy original car remote control, two-way remote control and rolling code remote control (Rolling code chips start with HCS commonly,such as HCS200,HCS201,HCS300,HCS301,etc)
Using
1. Clear code
Press the two buttons on the upper row of the 433 remote controller at the same time, after the indicator light keeps flashing, and then release your hand, it means the clearing is successful. The identification method for successful clearing is to press one of the four buttons of the remote control at will, and the indicator light only flashes once and then goes out.
2. Copying
Hold the original remote control in one hand and the copy 433 remote control in the other hand. The two remote controls are as close as possible. Press the door key of the two remote controls at the same time. your hand. Follow the same method in turn to copy the other three keys.
(If the light does not flicker when copying, you can change the position, put the heads of the two remote controls facing each other and try to copy. In short, you can try a few more positions.)
3. Recovery
If the useful code is cleared by mistake (that is, the above two keys may be accidentally pressed), before copying other 433 remote controls, you can press the two keys on the bottom row of the remote control at the same time. Recovery is complete.
Notes:
This copy of the remote control can not copy a computer code and rolling code , the device can only copy fixed code or learn codes.