Basic performance:
● Size: 14CM * 7.5CM * 2CM (length, width and height)
● Measurement frequency: 50kHz ~ 1000MHz
● RF output: -13dbm (maximum -9dbm)
● Frequency accuracy: < 0.5ppm
● Port SWR: < 1.1
● Display: 4.3 inch IPS TFT (800x480)
● USB interface: USB Type-C communication mode: CDC (serial)
● Power consumption: USB 5V 200mA, built-in 5000mAh/3.7V battery, theoretical battery life 18 hours, maximum charging current 2A
● Output capacity: 5V/1A, support for Android, Apple mobile phone
● Number of calibration points: 101
● Number of scanning points: 101
● Display Tracking: 4, Marking: 4, Setting Save: 5
● Scanning time: about 1.9s/1 times (50kHz ~ 1000MHz full frequency band)
Can measure S parameters, voltage standing wave ratio SWR, phase map, group delay, Smith chart...
19.0Wh (about 5000mAh/3.7V after conversion) large capacity lithium battery
Your can ask any questions about NanoVNA-F at: https://groups.io/g/nanovna-f
Or watch the Video: https://youtu.be/LwgF8JfZZaQ
NanoVNA-F hardware features include and are not limited to the following improvements:
1. Use 4.3-inch IPS TFT LCD & resistive touch screen, with a larger view angle and can be seen clearly in strong outdoor light.
2. Switch to large capacity 5000mAh/3.7V lithium battery.
3. The IC is charged by high current 2A, and the charging time is shorter.
4. Use a larger and better operating level.
5. Use a larger and better operating Power Switch.
6. Support Chinese and English menu switching;
7. Upgrade the user program by virtual U disk(16MB SPI Flash Memory Inside).
8. Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
9. Firmware open source at github.com/flyoob/NanoVNA-F
2020-07-14 NanoVNA-F firmware 0.2.0 beta released:
Firmware v0.2.0 beta update instructions:
1. Add data storage function, which can save s1p, s2p files to SPI Flash in real time, which is convenient for offline analysis;
2. To adapt to NanoVNA-Saver screenshot function, you need to use [nanovna-saver-0.3.4-bh5hnu.exe](https://groups.io/g/nanovna-f/files/PC%20Software) compiled by BH5HNU;
3. Support LCD backlight adjustment, the adjustment range is 1-100, the default is 75;
4. Modify the voltage display as a power display, supporting 8-level power display;
5. The calibration data interpolation uses the latest saved data instead of the default position 0, which is more in line with operating habits;
6. Some UI optimizations such as Marker points;
7. The maximum settable frequency is extended to 2.7GHz;
8. The hardware V2.2 and the new hardware V2.3&V3.1 use two different sets of gain tables, please be sure to select the corresponding firmware to upgrade
https://deepelec.com/2020/07/14/nanovna-f-0_2_0_beta/
Package list:
NanoVNA host x 1
USB Type-C data cable x1
SMA-JJ RG316 cable 20CM x2 (NanoVNA-F is a standard SMA female connector, which is used to switch to M head and N head to better protect SMA female)
1 set of calibration parts (50Ω standard load x1, open circuit calibration piece x1, short circuit calibration piece x1, use the included calibration piece, the instrument can be calibrated to get good measurement result data)
SMA-JJ double needle x1
SMA elbow external screw inner hole to inner screw inner needle x1
NanoVNA-F Quick Start Guide x1