Specificaiton for remote controller:
- Remote controller working voltage:DC 3V
- 1.2A receiver board working input voltage:DC 3.6V-6V
- 5A receiver board working input voltage:DC 6V-15V
- 1.2A receiver board size:55*33mm
- 5A receiver board size:55*36.5mm
Features:
This kit very good, it can control 3 pcs high power motor, it good for tank ,ship, car. we have make video.
Notice:
- Since the receiver board is a special product, the unstable operation of the personal DIY, the receiving board does not accept the return and after-sales
- When the ship is remotely controlled, the remote control distance will be affected by the water level and the height difference of the water surface.
Tips for safe use to prevent overvoltage and overload:
- 1.2A low-power receiving board maximum sustainable overcurrent should not exceed 1A
- The maximum continuous overcurrent of the 5A high-power receiving board should not exceed 3A
- When selecting a motor, you can’t just look at the no-load current. The voltage, load current, and locked-rotor current of the motor can only be used within the voltage and current parameters specified by the receiving board.
- Use high-power motors with caution
- If the driver IC of the receiving board becomes hot after the connected motor rotates, or the motor does not rotate or rotates very slowly, you cannot press the remote control to make the motor rotate.
- If the current is too large when the motor is locked, it is easy to burn the driver IC
Instructions for frequency binding:
1. Coding method: first turn on the remote controller switch, the indicator light of the remote controller starts to flash slowly and enters the automatic linking state, then turn on the power of the receiving board, the indicator light of the remote control flashes 2 times and then goes out, it means it is right. The frequency is completed (generally, the automatic frequency matching is completed within 10 seconds). In this way, it can be used. The remote controller can control the output voltage of the corresponding circuit of the receiving motherboard by pressing the buttons of each function.
2. This remote controller and any type A/type B remote controller of the receiving board can be paired with any large and small power receiving board. When multiple sets of remote control receiving modules are used at the same time, the groups can be energized one by one for frequency matching. The remote control and the receiving board do not have the function of locking the frequency code, and each time you use it, you need to operate according to the method described above.
Package include will depend on your choice
![](https://ae01.alicdn.com/kf/Ha76df1bb3f474008ba9d2a4ba94ca84e8.jpg)
![](https://ae01.alicdn.com/kf/Ha544d34839e9468db0e39fb45fac95597.jpg)
![](https://ae01.alicdn.com/kf/H095fad51017d45c096cb9b52d913ae36d.jpg)
![](https://ae01.alicdn.com/kf/H96125023e49f410588112b0ad7cde3974.jpg)
![](https://ae04.alicdn.com/kf/H22ac5c8fb2304a6fbe23a52b6237f27eW.jpg)
![](https://ae04.alicdn.com/kf/Hd48c7a69f8ff4f30a00c1f076f79f5a1G.jpg)
![](https://ae04.alicdn.com/kf/Hcd807fe8d1dd4147bf3abd596cc974c7K.jpg)
![](https://ae04.alicdn.com/kf/Ha08df92eb9274e24916084171a9525408.jpg)
![](https://ae04.alicdn.com/kf/H8183904918c34282bba348ed2f62281ef.jpg)
![](https://ae01.alicdn.com/kf/H1f7e31dcdf9c4c5d811982de897592716.jpg)
![](https://ae04.alicdn.com/kf/Hf82e78d59e334e918afadfa48ff12117k.jpg)
![](https://ae04.alicdn.com/kf/H702c49b806a642cdae144d8674ce0561n.jpg)