Solar Dog Repeller Instructions:
1. The strong ultrasonic signal can scare the animals. It is activated when the animals enter the detection range. Frightening the animals by using the unpleasant ultrasound in the area. Therefore, animals can not get used to the sound, and the repulsive force is stronger.
2. The operating frequency range of is 25 kHz ~ 61 kHz, with automatically converted frequency.
Technical Data:
Power Source: Solar Panels and 4 × 2/3 AA Batteries
Effective Distance: up to 8 meters (depending on the weather and environment, generally 4 to 6 meters is better.)
Detection Angle: 110° level (depending on the surrounding weather)
Waterproof Rating: IPX 4
Certification: CE & ROHS
It uses the principle of infrared detection, while detecting small animals, it sends out ultrasonic waves to drive small animals. It can help you stay away from the harassment of stray dogs, stray cats and other small animals, thereby protecting your property and your garden.
Because it is a portable design product, it can be installed anywhere in the home, garden or yard. This product can be used with low battery power. The product only emits 25 kHz ultrasound to repel animals without any chemicals. It will not cause any harm to the human body.
When the device is turned on,there will be an audible alarm for 2.5 seconds. The sound frequency is 5 kHz, which makes it easy to distinguish whether the device is working or not.
If no animal is sensed after working for a cycle (about 15 seconds), it will automatically standby, and will make the same working sound next time. When the boot working continuously ( the LED sensor light is not on) is always ultrasound, and there will be no working sound.
This product drives the animals without any harmful chemical substances, and only emits 25 kHz - 61 kHz ultrasonic waves to drive them away. It will not cause any harm to the human body nor to the animals, so as to protect animal species.
(1) Speaker: This product can drive away animals at high frequency.
(2) PIR Motion Detector: This is an infrared sensor with uninterrupted output signal. When the animals move within the detection range of the sensor, it will automatically emits the ultrasonic frequency to drive the animals away and the LED lights will also follow. Same below.
(3) LED indicator.
Caution:
1. Allow the animal repeller to operate continuously for best results.
2. Do not cover-up the PIR sensor.
3. Do not immerse repeller in water.
4. To clean the repeller, use a damp soft cloth and mild soapy water. Do not use harsh chemicals or abrasive cleaners that may damage the repeller.