Tips:
All of our products are of high quality If you have other needs, please feel free to purchase them in our store.
Click here to search more
Wiring diagram
Operating Mode
You can match the Remote Control with the Receiver Switch Module in 2 modes.
- Remote mode 1: Momentary Mode
Press and hold on one button -> ON; Release the button -> OFF
Details:
Press one button (on the remote control) , the relay (on the receiver board) turn to switch-on ;
Release the button, the relay turn to switch-off.
- Remote mode 2: Toggle Mode
Press one button -> ON; Press the same button again -> OFF
Details:
Press one button (on the remote control) once , the relay (on the receiver board) turn to switch-on ;
Press the same button again , the relay turn to switch-off.
- Part 1: Delete the existing data about remote mode
Note: When you receive our products, it maybe set in one remote mode randomly, that because each product got test when it can be arranged to shipment.So, please delete the existing data about remote mode for the first application.
Press the learning button on the Receiver Switch Module board 8 times , the existing data are deleted successfully.
After deleted the data, all the remote control cannot work any more.
![HTB1utu_SFXXXXcTXVXXq6xXFXXXp](https://ae01.alicdn.com/kf/HTB1utu_SFXXXXcTXVXXq6xXFXXXp.jpg)
- Part 2: Set up the Remote Mode
Set up : Momentary Mode
Press and release the learning button on the Receiver Switch Module board once.
Wait for a moment , the LED will turn off , indicating you entered the learning state.
Press and release one button on the Remote Control , the LED on the receiver board will flash on then off indicating the button was learned.
Press and release another button on the Remote Control, watching the LED go on and off again.
Wait 3 seconds, the LED will turn on again, indicating system is ready for use.
Set up :Toggle Mode
Press and release the learning button on the Receiver Switch Module board twice.
Wait for a moment , the LED will turn off , indicating you entered the learning state.
Press and release one button "A" on the Remote Control, the LED on the receiver board will flash on then turn off , indicating the button was learned.
Press and release another button "B" on the Remote Control , watching the LED go on and off again.
Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use
On this products details page, there is a demonstration video available.
You can also see the video at this URL: https://youtu.be/k06q76qthBw
*If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping*
Please note