FS-i6X Specifications:
Item: FS-i6X RC Transmitter
Channel: 6-10 (Default 6)
Model Type: Fixed-Wing/Glider/Helicopter
RF Range: 2.408-2.475GHz
RF Power: < 20dBm
RF Channel: 135
Bandwidth: 500KHz
2.4GHz System: AFHDS 2A / AFDHS
Modulation Type: GFSK
Stick Resolution 4096
Low Voltage Warning: < 4.2V
DSC port: PS/2 Port PPM
Chargeable: No
Antenna Length: 26mm (Dual Antenna)
Weight: 392g
Power: 6V DC 1.5AA*4
Display: STNTransflective Display, LCD 128x64 Lattice, VA 73x39mm, LCD with white backlight
Size: 174x89x190mm
Color: Black
Certificate: CE0678, FCC ID: N4ZFLYSKYI6X
Package include which group you choose from Color, and the Battery is not included.
Please Note:
We sale Mode 2 .
Mode 2-- Throttle stick on left
![1](https://ae01.alicdn.com/kf/HTB1g7AkgCrqK1RjSZK9q6xyypXak.jpg)
![2](https://ae01.alicdn.com/kf/HTB1gtAYXffsK1RjSszbq6AqBXXar.jpg)
![3](https://ae01.alicdn.com/kf/HTB1jS.WXovrK1RjSszfq6xJNVXaC.jpg)
![4](https://ae01.alicdn.com/kf/HTB196ZYXcrrK1RjSspaq6AREXXaN.jpg)
![5](https://ae01.alicdn.com/kf/HTB1u0AYXffsK1RjSszbq6AqBXXaL.jpg)
![6](https://ae01.alicdn.com/kf/HTB1TiZWXcfrK1RkSmLyq6xGApXao.jpg)
![8](https://ae01.alicdn.com/kf/HTB1c7AYXh2rK1RkSnhJq6ykdpXaL.jpg)
![9](https://ae01.alicdn.com/kf/HTB1y5UWXcfrK1RkSmLyq6xGApXaH.jpg)
Binding Setup:
All receivers are bound to their respective transmitter at production time. If you want to bind it with another transmitter,
please follow the steps below:
1. Install the battery in the transmitter, and turn on the power.
2. Open the main menu, and select "RX setup" function in the second page, then touch "Bind with a receiver" to enter bind mode.
3. Insert the standard bind cable into the power supply channel.
4. Connect the 6VDC power connector to any channel from CH1 to CH 6 with correct polarity to enter bind mode, The receiver
LED will flash at this time.
5. The transmitter will exit the bind mode automatically after having successfully bound with the transmitter.
6. Pull off the bind cable and restart the receiver. Please connect the servos and other telemetry modules to the receiver to check
if everything operates normally.
7. If anything is wrong, please repeat the above steps to bind again.
Notice: The bound transmitter and receiver will work abnormally if the transmitter or the receiver enters the binding state
by mistake. In other words, the receiver cannot be controlled by the transmitter. If so, you need to restart the transmitter.