Flysky FS-X6B FS X6B 2.4G PPM i-BUS 6CH Receiver
Fit for FS-i10,FS-i8,FS-i6,FS-i6s,FS-i6x,FS-i4,FS-i4x ect.FS series rc transmitter.NOT INCLUDED THE REMOTE CONTROL
-It is a 6 channel two-way receiver designed for multi-rotor aircraft
-Use the AFHDS 2A(Automatic Frequency Hopping Digital System) protocol and dual omnidirectional antenna with superior noise reduction techniques.
-The FS-X6B supports 6 channel PWM output, standard PPM output and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface.
Specification:
-Size: 37*22*7mm/1.4*0.9*0.3inches
-Weight: 5g
-Ports:PWM signal port:GND, VCC. Outputs channels 1-6 PWM.
-PPM signal port: Outputs standard PPM signal.
-I-BUS signal port: Outputs i-Bus signal,up to 18 channels.
-Voltage sensor port:External power sensor (1S-4S connector) +0 to +18V.
Binding:
1. To prepare the transmitter for binding information refer to your transmitter&x27;s user manual.
2. Power on the receiver while holding the bind button. If the reciever&x27;s LED is flashing this means it has entered bind mode. After the successfully binding, the transmitter will automatically return to the previous menu. If binding is successful the receiver&x27;s LED will stop flashing a remain solid.
3. Check if all the model and receiver work as expected. If anything does not work as expected, restart this procedure from the beginning.
Compatible Transmitters:
The FS-X6B receiver is compatable with all AFHDS 2A Transmitters,for example FS-i10,FS-i8,FS-i6,FS-i6S,FS-i6X,FS-i4,FS-i4X.
Package Include:
1* FS-X6B Receiver and cables