4 in 1 Mini F3 OSD Flight controller tower Integrated Flytower BLHeli ESC Built-in 5V 1A output BEC f3 tower
Notes:
First, equipped with MPU6000 F3 flight control acceleration faster response; integrated 5V 1A BEC, integrated OSD. (This version is 6DOF, no barometer and electronic compass)
1. This board provides all the features, weighs only 7.7g, fixed hole for the 20MM ( M2.5 hole );
2. For four-axis models tailored, built-in LC filter, support BF firmware;
3. Using STM32F3CCT6 single-chip 256K flash memory, MPU6000 sensor SPI interface connection, faster computing speed;
4. Support 2-4S power input;
5. Built-in 5V 1A output BEC;
Receiver configuration, when SBUS and DSM receiver input, please configure RX3 as the input interface.
The DSM receiver takes power from 3.3V.
The SBUS and PPM receivers take power from 5V.
Factory firmware: betaflight 3.1.0-OMNIBUS.
BS-10A 4 in 1 ESC:
4 IN 1 through machine BLHELI S ESC
Parameters:
1. Input voltage: 2-4S LiPo
2.BEC output: none
3. Single ESC continuous operating current: 10A (maximum current: 15A 5 seconds)
4. Four in one ESC size: 27 X 31mm
5. ESC weight: 3.7g
6. Firmware: BLHELI_S
7. Support DSHOT, Oneshot,
8. Processor: SILABS EFM8BB21F16G
9.MOS tube: TPN2R703NL
Package including:
1 set mini F3 flytower( Unassembled )
Recommended items(do not include in the package)
1. Frame : 80-90mm
2. Motor : 1104 7500kv
2. Battery : 2S 400-500MAH
3. Propeller : 2 inch 3-blade or 4-blade propeller
4. Mini receiver: Frsky Flysky DSM2 receiver
5, Transmitter: 25-200mw switchable