Basic parameters:
Voltage: DC 9-15V
PCB size: 76 * 86MM
Output terminals: RCA can connect amplifier, amp, 3.5 terminals can be connected to headphones
Input support:
Coaxial: PCM44.1k ~ 192k 24bit / DOP DSD64
Fiber: PCM44.1k ~ 192k 24bit / DOP DSD64
I2S / DSD: PCM44.1k ~ 384k 32bit / DSD64, DSD128, DSD256
I2S / DSD pin definitions: PCM_BCLK-DSD_CLK, PCM_LRCK-DSD_L, PCM_DATA-DSD_R
Pin Description:
Board interface upside down, top to bottom: GND, vacant, LRCK, BCLK, DATA
The main selling point:
~: Perfect and seamless interface, PCM DSD switch without defect.
~: ES9038Q2M more perfect parameters, 129dB DNR -120dB THD + N
~: Easy to install
Because the ES9038\\&39;s MCLK is a stand-alone clock of 100M, it is enough to simply enter DATA BCK LRCK. Delicate and rounded, the extension is very good. With the NE5532 op amp
Audio input settings:
J1 short, coaxial input
J2 shorted, optical input
J1 and J2 are not shorted, I2S input
Filter settings:
J3, J4, J5, J6 not shorted, filter = apodizing fast roll-off filter
J3 not shorted:
J4 short, filter = brick wall filter
J5 shorted, filter = corrected minimum phase fast roll-off filter
J6 shorted, filter = minimum phase slow roll-off filter
J3 short circuit:
J4 shorted, filter = minimum phase fast roll-off filter
J5 shorted, filter = linear phase slow roll-off filter
J6 shorted, filter = linear phase fast roll-off filter
volume control:
VOL: 1-2 short to mute, 2-3 short to the maximum volume
Can be an external single potentiometer, Potentiometer rotary handle to the jumper direction, followed by the corresponding wiring, increasing the volume from left to right