Model Number: FU 001
Brand Name: xuanlongyuan
Channel: 4
Package: No
Use: Universal
Wireless Communication: RF
Frequency: 315MHz/433MHZ
channel: channel : 4CH
working voltage: working voltage : DC12V
working frequency: working frequency : 315MHz/433MHZ
receiver sensitivity: receiver sensitivity : >-95dB
Coding type: Coding type : Learning code
PCB size: PCB size : 70*50*18mm
Model Number: FU 001
Brand Name: xuanlongyuan
Channel: 4
Package: No
Use: Universal
Wireless Communication: RF
Frequency: 315MHz/433MHZ
channel: channel : 4CH
working voltage: working voltage : DC12V
working frequency: working frequency : 315MHz/433MHZ
receiver sensitivity: receiver sensitivity : >-95dB
Coding type: Coding type : Learning code
PCB size: PCB size : 70*50*18mm
Specifications:
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
1.Working Voltage: DC12V ±10%
2.Current:Standby less than 10mA,Working less than 128mA
3.Working Temperature: -10&39;C—+60&39;C
4.Receiver Frequency: 315MHz/433.92MHZ
5.Receiving Sensitivity: -105dB
6.Output State: Switching Value
7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A
8.Receiver Board Size:70*50*18mm
9.Case Size:75 * 55 * 30mm
Encoding Type: Learning Code
Add transmitter by the Learning Button on the receiver
1.Control Mode
Output State: It is adjusted by the Jumper on the Receiver Board,
Momentary-----Jumper on "1&2"
Toggle--------Jumper on "3&4"
Latched-------Jumper on 1 Pin or Take away the Jumper
1)Toggle/Self-Lock: Press->On; Press again->Off
press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2)Latched/Inter-Lock: Press->On; Press other button->Off
press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3)Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
(Original Setting is Momentary , Change it by yourself.)
Learning Method:
Input DC12V Power for the receiver,press the learning button ,Green LED indicator OFF,Then press transmitter ,the LED indicator flash fast,It mean learning successfully.
Clearing Code:
Keeping press the learning button 8 seconds until the LED indicator ON, It mean the code have been cleared successfully.
Note: 433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency
pacote inclued:
1 x Receiver(with cover)
4x Transmitter(with battery)