1. Blocking the interference of the low-frequency wave transmitted through the ground to the optical head, optical disc and servo system of the CD player, so that the CD player can read and record the CD record signal GENG plus WAN.
2. On the power amplifier equipment, the components in the equipment are prevented from vibrating, and the distributed capacitance and distributed inductance between the devices and the contact resistance are changed, which deteriorates the electrical performance of the device (especially the filament in the tube of the amplifier). And the electrode ZUI is afraid of vibration).
3. Use the nails on the speaker cabinet to effectively reduce the contact between the cabinet and the ground or the desktop, thus reducing the occurrence of harmonic vibration.
4. The addition of the nails causes the resonance point of the device to shift, thereby changing the resonance coefficient of the device itself, that is, avoiding the interference of the low-level audio waves through the air to the device.
5, audio equipment, the frequency of the sound is straight, the music is integrated, balanced, the protrusion of any frequency band will cause hearing fatigue and even cause distortion of certain frequency bands. Most audio equipment can make the frequency response very straight, but not enough to fully express the details of the music. To get rich details, you need equipment with excellent signal-to-noise ratio, dynamic range, phase characteristics, transient characteristics, harmonic distortion characteristics, etc. Shock absorbers can reproduce many lost details for the listener to hear. No sound details and beautiful sounds.
6. For those inferior, incorrigible equipment, it will not help. It does not straighten the frequency response curve of the concavity and does not smooth out serious phase distortion. In fact, inferior equipment is not equipped with shock absorbers. Of course, the use of suspension feet is not necessarily high-end equipment, as long as the design and production of regular products without serious defects can be used to improve the sound with shock absorbers.
Gasket height: 5MM. Diameter: 25MM
Feet height: 25MM. Diameter: 28MM
Foot nail + gasket height: 28MM
Personal recommendation: 6 sets of 6 inches or less (including 6 inches) are recommended, 8 sets of floor box or 6 inch or more, 8 sets are recommended for CD, amplifier, preamp and post. (One set is equal to: one nail, one pad, two pieces of 3M double-sided tape)