3S 10A 12.6V lipo lithium Polymer BMS/PCM/PCB battery protection circuit board for 3 Packs 18650 Li-ion Battery Cell
18650 3 series lithium battery protection board 10.8V 11.1V 12V 12.6v (and can be used for more than 3 series, and maximum support 3S20P)
3 Series 18650 battery
11.1V (Li-ion 18650 or li-ion battery rated voltage)
12.6V (Li-ion battery full charge voltage)
10.8V ( Lipo battery pack rated voltage)
The lithium battery protection board is not included the welding tabs.
BMS activate method : Use 12.6V Li-ion charger to charge
NOTE: this board not suit high power electronic tools, if use for screwdrier and drill, please don&39;t buy.
Features:
1) high-accuracy voltage detection circuit;
2) terminal of the charger using high voltage device;
3) Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit);
4) MOS transistor can control the battery charge and discharge;
5) low standby current consumption.
Parameter:
Over Charge voltage:4.25-4.35v±0.05v
Over Discharge voltage: 2.3-3.0v±0.05v
Max Working current:10A
Max peak current:15A
Working temperature:-40---+50
Storage Temperature:-40-- +80
Small current:6uA
Life cycle:more then 30000 hours
Resistance:Less than 60mΩ
Short Cut:Protectable,Charge can repair
Size:53*16*4mm
Application:
Vacuum cleaner,massager battery pack,LED backup power supply,12V li-ion electronics, solar power led, ect
wiring diagram
P+ charge/discharge positive
P- charge/discharge negative
after connect battery, if P+ and P- no output, please use 12.6V charger to active
Mass production, the factory price.
3S1P demo, (note: we only sell PCM, not include the battery)
3S1P demo, (note: we only sell PCM, not include the battery)
3S1P demo, (note: we only sell PCM, not include the battery)
3S2P demo, (note: we only sell PCM, not include the battery)