The Lii-PL4 is a new 4Slot multifunctional smart battery charger launched by LiitoKala. Low price, while four types of batteries can be applied (Li-ion 4.2V / 4.35V Ni-MH 1.2V Li-Fe 3.6V), and a variety of battery sizes.
Charger technical parameters:
Input power: AC 110-240V 50/60Hz / DC 12V-1A
Output voltage: DC 4.2V for Li-Ion
DC 4.35V for IMR
DC 3.65V for LeFePO4
DC 1.48V for NiMH/NI-Cd
Output current: Li-Ion/IMR/LiFePO4 2000mA*1 (fourth channel only),
1000mA*2,
500mA*3
500mA*4
NiMH/NiCd: 1000mA*2, 500mA*3 500mA*4
Constant current, constant voltage charge, cut-off current: <100m A;
External power standby current: <15.0m A;
Compatible battery types and models
Li-ion / IMR/LiFePO4:26650,21700,18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440
NiMH/Cd:AA, AAA, SC, C
Sixth, charger size:
133mm x 100mm x 35mm (length / width / height)
Weight: 175g (including AC power cord)
User Manual Lii-PL4
Cautions
1.This charger can charge all cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4
2.Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit
3.If DC input, only 12V 1A is recommended
4.Mind heating while charging
5.Remove the charger from power source after charging complete, and remove the battery from the charger at the same time
6.For indoor use only
7.The displaying data only for reference, please refer to professional instrument for more accurate data
Specification and function
1.Multi-power input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter(selective), four independent charging and micro computer management system.
2.Three charging current mode (500mAh/1000mAh/2000mAh, 2000mAh current mode is fixed only on the fourth slot.
3.The LED charging indicators: both for charging progress: 25% - 50% - 75% -100% and battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V (IMR)
4.Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)
5.Refresh for OV battery. It will not charge any battery of1.65 -1.85V (refresh current can be detected only)
6.Protection for over-charge and over-discharge and short circuit. Identify broken battery and polar reverse protection.
7.Charing under constant voltage and current
Button, LED and function
1.Buttons : While power supply is connected, 1) Short press(less than 2S) the mode button to change the battery type. It will start to charge 5 seconds after setting the battery type (3.2V or 3.80V), 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries; 2) change the charging current at any time during charging by long press(more than 2S) the mode button
2.LED: While power supply connected, all LEDS light up immediately 1) If no battery is inserted, the 500mAh LED (one of the three current display LEDS ) will keep on and others will be off. 2) When battery is inserted and detected, 4 LED charger indicator for the channel will be on among which 3.7V battery type LED keeps flashing indicating to set the battery type, if no operation in 5 seconds, it begins by automatic detection(Li-Ion 3.7V or NIMH) then four LED indicators will display the charging status. 3) During charging, short-press the mode button to show the battery type within 5 seconds; 4) If no power supply is connected, inserting a battery, it can quick shows the remaining charger volume of the battery.
3.LED displaying graphic reference
Technical specification
1.Input : AC cable 110-240V 50/60Hz (included)/ DC 12V 1A(selective)
2.Output voltage: DC 4.2V for Li-Ion 3.7V
DC 4.35V for Li-Ion 3.8V( IMR)
DC 3.65V for LeFePO4
DC 1.48V for NiMH/NI-Cd
3.Output current: Li-Ion/IMR/LiFePO4 2000mA*1(only for slot4),
1000mA*2, 500mA*3 500mA*4
NiMH/NiCd: 1000mA*2, 500mA*3 500mA*4
4.Constant voltage, cut-off current: less than 100mA
5.Standby current: less than 15mA
Compatible battery types and sizes
Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440
NiMH/Cd: AA, AAA,SC, C
Size:
133mm x 100mm x 35mm (L x W x H)
Weight: 175g: grams (incl. micro cable)
Electrical Parameters:
1. Input : AC cable 110-240V 50/60Hz (included)/ DC 12V 1A(selective)
2. Output voltage: DC 4.2V for Li-Ion 3.7V
DC 4.35V for Li-Ion 3.8V( IMR)
DC 3.65V for LiFePO4
DC 1.48V for NiMH/NI-Cd
3. Output current: Li-Ion/IMR/LiFePO4 2000mA*1(only for slot4),
1000mA*2, 500mA*3 500mA*4
NiMH/NiCd: 1000mA*2, 500mA*3 500mA*4
4. Constant voltage, cut-off current: less than 100mA
5. Standby current: less than 15mA
Compatible battery types and sizes
Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440
NiMH/Cd: AA, AAA,SC, C
Size and weight:
133mm x 100mm x 35mm (L x W x H)
Weight: approx175g (not including AC cable)
Cautions:
This charger can charge all cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4
Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit
If DC input, only 12V 1A is recommended
Mind heating while charging
Remove the charger from power source after charging complete, and remove the battery from the charger at the same time
For indoor use only
The displaying data only for reference, please refer to professional instrument for more accurate data
Specifications and functions:
1.Multi-power input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter(selective), four independent charging and micro computer management system.
2.Charge current intelligent auto-set of total three levels:500mA /1000mA/2000mA),2000mA is fixed only for slot4.
3.Multi-functional LCD charging display: for charging progress 25% - 50% - 75% -100% , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V (IMR), charging capacity, voltage and current: 0.5A/1A/2A.
4.Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)
5.Refresh for OV battery. It will not charge any battery of1.65 -2.20V (refresh current can be detected only)
6.Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.
7.Charging at constant voltage and current
Button and LCD :
1.Button of Mode(Channel button): there are 4 independent buttons separately for each channel. While power supply is connected and battery inserted, 1) Short click the channel button in 5S to change the battery type. It will start to charge 5 seconds after setting the battery type (3.2V or 3.80V), 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries;
Note: Battery type can be only selective before charging starts.
2.LCD: While power supply connected, the LCD will light up for 3S: 1) If no battery is inserted, the LCD will display “null” and will be off in 30S 2) When battery is inserted and detected, the LCD will show channel number while the battery type image “ Li-Ion 3.7V”flashing indicating to set the battery type: this moment if short click the channel button, it can set battery type; if no operation in 5 seconds, it begins by automatic detection(Li-Ion 3.7V or NIMH) then charging percentage image will flash meaning the start of charging. At the same time the LCD displays also charge voltage, capacity, time and current. When charge completes, it will display“100%”mean while it shows “End” on the LCD right down corner.
LCD display graphic reference: