Use reminders
1. The maximum withstand voltage of this product is 32 volts, and it is recommended to use within 28 volts This module is a pure step-down module.
There is no boost function, if you want to use 20V output, you must use a DC power supply above 21V
Electricity;
The low voltage of the product can reach 6V, but most of the fast charging will not be activated at 6V;
The output power of 100W can only be achieved when the PD is output (PD20V, 5A)
2. For low-voltage and high-current fast charging, please use the original data cable. If you want to measure the charging voltage and current,
-Be sure to use a low-resistance USB meter Otherwise, the charging current will be affected
3, OPPO and - - plus mobile phone charging must use the USB port
QC4+/QC4.0/PD3.0 and other protocols have to use TYPE_C port
4. When the USB port and TYPE_ _C port are plugged into the mobile phone at the same time, both ports are 5V output
High compatibility: support the following fast charging protocols
PD2.0 PD3.0 PPS
Qualcomm QC4+/QC3.0
Huawei SCP/FCP
OPPO VOOC
-Add DASH
Apple 2.4A
Samsung AFC
VIVO 9V2A Twin Engine
MediaTek PE2.0
The final charging current is controlled by the mobile phone, and fast charging also needs the support of the mobile phone, not external
Grab a charger that supports fast charging and your phone will charge faster.
|At the same time, this product is a conversion module of the fast charging protocol, and the front end is required to charge the mobile phone.
DC input power.