Working Voltage: DC 3.3~5V.
Quiescent Current : ≤5mA.
Working Frequency: 433MHz (Others Can Be Customized).
Receive Sensitivity: -108dB.
Receive Distance: 15 Meters Above.
Frequency Band: ±0.2MHz.
Working Temperature: -25~75.
Working Mode: Point Move, Self-locking, Interlocking.
The Output: 4 Channel CMOS Level Signal Corresponding To The Remote Control ABCD 4 Buttons.
Data Of 433MHz Antenna:
Model Number: ANT240.
The straightened length of this antenna is about 25mm, the outer diameter is about 6mm after being wound, and the end is stripped of tin about 3mm; the diameter of the copper wire is 0.5mm, and the outer diameter is 1.3mm.
The color is black.
Both the receiving module and the transmitting module can be used.
Note:
1.This remote control transmitter only supports the learning code (1527) of the receiver
2.This remote can not be programmed.
3.We don&x27;t offer retail package, but we will pack it well before shipped out.
About Working mode:
Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.
Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.
Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.
Learning the Code:(Momentary)
Press the learning key on the receiver once time, it comes into momentary setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.
Learning the Code: (Toggle)
Press the learning key on the receiver twice time, it comes into toggle setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Press the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.
Learning the Code:( Latching)
Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF.
For example: Button A = ON, Button B = OFF
Press the learning key on the receiver triple time, it comes into latching mode .
Wait for a moment, the LED indicator on the receiver board will flash then come off.
Press the remote button A. LED flash for 5 times.
Press the remote button B. LED flash for 5 times
After 3 seconds, the LED indicator will be on again, learning successfully.
A = ON, B = OFF.