YAESU FT-891/991/FT-817/FT-857D/FT-897D Special Radio Connector
![10](https://ae01.alicdn.com/kf/HTB1nMYzc6fguuRjSszcq6zb7FXak.jpg)
http://www.ftdichip.com/Drivers/VCP.htm
Through the improvement of HAM suggested that the majority of the rationalization of absorption, BH4TDV combined with rich manufacturing experience, in response to the international mainstream plug and play concept, strengthen the design, optimization of interface, the launch of the 2017 version of the MINI link U5 radio communication device, plug and play, portable, compatible with multiple modes of operation, suitable for a variety of applications.
Full software support:
HRD\\DM780\\LOGG32NIMM\\WriteLog\\ECHOLINK\\pasyPal\\SSTV\\Cw_player\\APRS\\AGWTracker\\MMTTY\\MMVARI\\MIXW and so on.
Performance introduction:
* imported high grade FIDI FT-232RL USB interface chip
* patch process
* imported 6N137 high speed communication optocoupler, the communication rate is up to 115200.
* finished product data line connection cable, plug and play
* radio remote control interface support: All-optical isolation, CAT remote control support 115200 stable high speed communication
* complete signal support: contains TXD\\RXD\\RTS\\DTR\\CTS signals.
* support SQL control, CTS signal introduction
*Specially customized high quality audio isolation transformer with shielded isolation and no AC sound
* plug and play, without any setup, no external power supply
* standardized voice / data radio interface: DATA (MINI DIN 6 specifications)
* standardized CAT remote control interface: CAT (MINI DIN 8 specification)
* the professional wave peak is welded, and the technological level is high.
* digital mode optimization of ground wire wiring structure.
Support radio model:
YAESU: FT-891 FT-991 FT-817\\857\\897\\7800\\8800\\8900\\100D and so on
ICOM support: IC-2710, 2720, 2820, and 703 (only data interface, PACKET), 706 (Only data interface,PACKET), 7000 (Only data interface,PACKETEtc.)
KENWOOD support: TM-V71, TS-480 (only DATA) and so on
Hand: support
Package include:
1PC + 5 lines
![11](https://ae01.alicdn.com/kf/HTB1ju2Lc6fguuRjSspaq6yXVXXa0.jpg)
![1](https://ae01.alicdn.com/kf/HTB1.RPkvHZnBKNjSZFrq6yRLFXaO.jpg)
![2](https://ae01.alicdn.com/kf/HTB19XBrKx9YBuNjy0Ffq6xIsVXav.jpg)
![3](https://ae01.alicdn.com/kf/HTB1i.NmKx1YBuNjy1zcq6zNcXXai.jpg)
![4](https://ae01.alicdn.com/kf/HTB1bw0NKr1YBuNjSszhq6AUsFXa1.jpg)
![TB2kNHmcXXXXXafXpXXXXXXXXXX-10318019](https://ae01.alicdn.com/kf/Hdd13f3e04e634f179058f26e97454b02R.jpg)
![5](https://ae01.alicdn.com/kf/HTB1IbUivtknBKNjSZKPq6x6OFXaL.jpg)
![U5_mini_link_09](https://ae01.alicdn.com/kf/H07f155e5c16e4bc083a72831c7af7387V.jpg)
![U5_mini_link_10](https://ae01.alicdn.com/kf/H410ff50c72c246ca8003cbd7877170d8A.jpg)
![U5_mini_link_11](https://ae01.alicdn.com/kf/Hb90dfd82680c451f92b559afd18989cbX.jpg)
![U5_mini_link_12](https://ae01.alicdn.com/kf/Hc6d97c41464f45db8ed754558cbd7891Z.jpg)
![U5_mini_link_13](https://ae01.alicdn.com/kf/H8bd342500bc640029336ccae44eca501Q.jpg)
Application connection case:
![](https://ae01.alicdn.com/kf/HTB1Pn8TXA9WBuNjSspeq6yz5VXaK.jpg)
The FT-817 857897 uses only the CAT instance.
![](https://ae01.alicdn.com/kf/HTB1.qpVXpGWBuNjy0Fbq6z4sXXa1.jpg)
The FT-817 857897 uses only the CW instance.
![](https://ae01.alicdn.com/kf/HTB1ktlUXxSYBuNjSsphq6zGvVXaL.jpg)
Common problem FAQ:
Will NOT work from FT897 front microphone CAT
How to set up the 1, U5's DTR\\RTS?
Answer: the connector itself does not need to be set up, and all kinds of applications are set up RTS=PTT, DTR=CW, CTS=SQL (when needed).
2. How to send CW?
Answer: U5 CW output is equivalent to a hand key contact on-off signal output, controlled by the computer software DTR signal, using the CW line (the same audio line, equivalent to the audio line) to connect CW and radio station key mouth, hand set key mode of a software design CW=DTR.
3, using 817, 857, 897 radio stations, HRD can not be connected, display frequency?
Answer: the USB port number in HRD is selected. It is not clear that the port number is selected automatically or is checked in the device manager. Communication rate selection, should be consistent with the rate set by the radio itself, FT-897 station 19 menu view or adjust. Radio station 20 should be set to CAT.
If the USB port number is greater than 10 after the driver is installed, the USB port number should be set in the device manager<10Such as,COM2.
The matching CAT line is square port, and the CAT socket of some radio stations is deeper. It may not plug in to the end, causing poor contact. Properly cut off a little CAT cable side and side plastic, so that cable can be inserted into the end.
The above check is correct, it is still unable to link the computer, check whether there is output of the 13.8V power of the CAT socket of the radio station (radio CAT interface pin definition, refer to FT-857D English manual 32 pages), no output, check and replace the built-in small insurance resistor of the radio.
3A, I use HRD software, FT-897D radio, has been able to correctly display the frequency, but the connection HRD radio is PTT launch?
Answer: RTS, DTR do not hook, RTS hook, after the connection, the PTT trigger the radio long hair.
3B, I use HRD, every time I use it, sometimes I find port number normal connection display frequency, sometimes I can't find port number, reopen HRD and port number. What's the problem?
Answer: related to HRD software, you need to connect USB first, then open the HRD software, otherwise HRD can't retrieve the USB port number.
4, CW settings in HRD software?
There are 2 types of settings:
1, keyed CW: select CW, MODES+IDS set KEY port and key control output DTR hook selected. If you need PTT, select USE PTT
2, the audio CW: selected MCW, selected PTT=RTS, or open radio sound control.
4A, I use HRD software, FT-897D radio, has been able to correctly display the frequency, with DM780 software, PSK31, SSTV and so on, it can receive, but can not launch, how to set up?
Answer: DM780 software has 2 ways to control PTT launch, one is command mode (Radio support), and one is RTS signal control. The software default is the command mode.
1) command mode control radio PTT, if the radio has shown the frequency in the HRD start interface, and the radio supports the command to control PTT.
In the DM780, press F8, select PTT on the left list, select the middle item HRD on the right side, and set it well, and the TX icon will be displayed after the setting.
2) HRD uses the command to control the radio PTT by default, and if the radio does not support the command mode, the RTS signal can be selected to control the PTT launch.
At the HRD frequency, operate the main interface, press F8, select COM PROT TX on the left list, and the right COM PROT PIN to select RTS.
5, I use the U5 LINK YAESU box, connecting FT-817, PKT mode, can control the launch, but the hand listens no sound, feeling the DATA line is loose?
Answer: the matching DATA line is square port, and the DATA socket of some radio stations is deeper. It may not plug in to the end, so that the contact is not good enough, and a bit of DATA cable should be cut off properly.
6. How do I test the normal audio and receiving circuits of U5 LINK?
Answer: Unplug the LINK all SP and SP connections, LINK computer with audio cable to connect the computer, open a large volume of computer, playing a MP3 LINK MIC, a computer headset, find a small capacitor or fine wire, short circuit LINK DATA socket 1, 5 feet, headset music that audio signal control circuits.
DATA interface definition reference:http://hi.baidu.com/bh4tdv/blog/item/7e8eb137a444354dac4b5f69.html
7. Using the DATA interface FT-897D, the launch is controlled in the UV segment, and the signal is not output.
Answer: refer to the FT-897D English manual 37 pages, switch to the PKT mode by the MODE mode key, when the PKT mark is lit, switching from the electronic switch in the radio to the DATA interface.
8, the U5 for YAESU connector to connect hand? What support platform?
Answer: according to the self-made hand wired linkhttp://hi.baidu.com/bh4tdv/blog/item/7e8eb137a444354dac4b5f69.html.
Kemmu, YAESU, MOTO compatible interface can be hand hand. The YAESU U5 LINK, MOTO hand in hand with optional jumper.
Such as the use of U5 for ICOM connector hand, the need for a separate power from the ACC access to 5V. The use of PTT for triggering.
9, U5 LINK connects desktop computers and radio stations. They used to be sent to SSTV by desktop computers. Now they connect to laptops, send normal, receive images tilted or unable to receive. What is the problem?
Answer: LINK has nothing to do with it. You will find that MIC-SP and SP-MIC can't be decoded without LINK, 2 computers and sound card direct audio line.
This phenomenon is related to the sound card clock. There will be a slight difference between the different sound card clock. The difference between the clock will cause the sampling frequency offset, resulting in the difficulty of decoding or the decoding.
In this case, 2 computers are used, and the audio line is used to dock the double - hair sound card, MIC-SP, and SP-MIC. The 2 computers open the SSTV software, launch the test frequency select 1900, launch the test audio, receive the computer to observe whether the audio sampling peak is 1900, if different, the option -- sets MMSSTV-- other -- the clock, chooses the different clock, causes the sampling frequency to be correct.
Similarly, some voice card decoding software, such as APRS, and so on, will cause the situation that the sound card clock is different. It is necessary to see whether there are clock adjustment options in the application software. If there is no option, only the hardware TNC decoding can be selected.
10. Use the DATA interface to connect FT-450. When the launch is launched, the radio automatically jumps to the CW mode. How does the remote control frequency connect?
Answer: refer to FT-450 English manual seventy-third page, press the MODE mode key on the radio, switch to the radio DATA interface, at this time the radio DATA mark is lit.
The FT-450 remote control frequency still uses the original RS-232C interface of the radio station, and uses the serial port line to connect the computer serial port. Or use FT-450 special version, only occupy the computer 1 USB ports.
11, FT-950 radio, can not trigger PTT launch?
Answer: when used for FT-950, 950 use is required before ordering, and a relay that triggers the PTT will be installed when the delivery is delivered. This service has stopped and the FT-950 - dedicated LINK will be launched.
12. Can the USB sound card be integrated so that the 2 audio lines can be omitted from the computer, and does this be considered?
Answer: not to consider the test, from the sale of several commonly used USB sound card, sound card using USB will make the application settings more trouble, some software uses the USB sound card cannot be decoded, the several main phenomenon after disturbance test encountered: suddenly no sound, suddenly the sound distortion, left and right on the contrary, probability at the same time, the damage is relatively large, some fault phenomenon is hidden, which is difficult to exclude. If you encounter a USB sound card failure, you can quickly find the problem and solve it, otherwise it is not recommended.
13. What is the stability of the USB interface and the RS-232C serial port?
Answer: the problem of what a commonplace talk of an old scholar, early in the industrial field, currently on the market USB RS232C serial devices are not native RS232C serial stable (electromagnetic interference environment), but almost everyone in the contradiction is to control the radio with a laptop, notebook computer now basically do not provide native RS232C serial interface.
![QQ20180905114606](https://ae01.alicdn.com/kf/HTB1mjRmKuSSBuNjy0Flq6zBpVXaS.jpg)
![QQ20180905114555](https://ae01.alicdn.com/kf/HTB1wgfLvTmWBKNjSZFBq6xxUFXa9.jpg)
![2](https://ae01.alicdn.com/kf/HTB1HYdWeByWBuNkSmFPq6xguVXa2.jpg)
![3](https://ae01.alicdn.com/kf/HTB15cYomQOWBuNjSsppq6xPgpXaL.jpg)
![4](https://ae01.alicdn.com/kf/HTB11bf2dsUrBKNjSZPxq6x00pXaR.jpg)
![5](https://ae01.alicdn.com/kf/HTB1AUg9dvImBKNjSZFlq6A43FXaF.jpg)
![6](https://ae01.alicdn.com/kf/HTB1Rsi.mMaTBuNjSszfq6xgfpXaj.jpg)
![7](https://ae01.alicdn.com/kf/HTB1uXT8mHSYBuNjSspfq6AZCpXaG.jpg)
![8](https://ae01.alicdn.com/kf/HTB10U3VmStYBeNjSspkq6zU8VXaV.jpg)