PT1000 RTD-to-voltage converter turn 0-5V 0-10V linear temperature transmitter module
This is a linear conversion module, the internal chip processes the input signal is converted to heat resistance temperature (voltage signal).
There are two output voltage range selection.
Module parameters
1, the working voltage: 9V ~ 24V
2, the input resistance: Pt1000 RTD
3, the output voltage: 0.00V ~ 5.00V / 0.00V ~ 10.00V
4, temperature range: -50 to +300 (degree).
5, the output mode: S2 pads on the circuit board: open (output 0.00V ~ 5.00V); short circuit (output 0.00V ~ 10.00V), default is open.
6, Application: remote data acquisition and control equipment;
7, size :( length) 26mm * (width) 23mm * (high) 10mm
8, module interface:
24V: positive power supply Interface (9V ~ 24V).
G: Power ground interface.
IN: RTD positive electrode interface.
G: thermal resistance of the negative electrode interface.
OUT: signal output interface (0.00V ~ 5.00V / 0.00V ~ 10.00V).
G: Power ground interface.
Note: When the output of 0.00V ~ 10.00V, power supply voltage to 15 volts.
Output (0.00V ~ 5.00V) Resolution: 0.0142857V / (V / ° C)
Output (0.00V ~ 10.00V) Resolution: 0.0285714V / (V / ° C)
:( Formula to calculate the measured temperature output voltage (V) / resolution) -50 = measured temperature