(BGNING) Aluminum Alloy Dual Handheld Diving Adjustable Bracket Kit for GOPRO for DJI and other sports cameras, micro-single, SLR camera waterproof case, including Canon, Sony, Nikon, Panasonic, Olympus etc..
Product gross weight: about 655g, net weight about 590g
Packing size: 280*66*66mm
Product material: aluminum alloy + stainless steel + silicone
Color: black (support custom, has MOQ)
Minimum outer dimensions of the product: 278*195*55mm
Product outer dimension width stretching range: 278~385mm
Dual handheld installation board size: 220*55mm;
Designed with a vertical and horizontal mounting slot to secure the waterproof case or camera;
The size of the waterproof case can be installed:
the maximum distance between the two fixing screw holes is 166mm wide, so the mounting screw hole of the waterproof case must be smaller than 166mm.
One screw hole also can be installed.
This dual-handheld is optimized on the basis of the previous generation products, modified the shortcomings of the previous products, and then gave the professional enthusiasts the experience feedback, and further modified the dual-handed diving photography accessories.
Features:
1. The handles on both sides of the product are hollowed out, which not only reduces the weight, but also plays a key role in the comfort and slip resistance of the grip;
The handle is designed into a two-step structure according to the comfort of the human hand, so that when the handle is held by the hand, the index finger is on the first step, the middle finger and the little finger are on the second step, and there is neither a cutting hand nor a natural grip;
When you hold it hard, you can fully appreciate the fullness of your hands, and the force acts on the handle;
The handle height is also relatively high to 130mm, so that the hand will not be squeezed in a small space; there is a one-inch ball head above the handle, the ball head can expand the equipment according to their needs, such as fill light, Extension arm, buoyancy lamp arm, etc.;
2. The link between the two hand-held mounting plates and the handle is a card slot pull type, which is locked by an M5 screw, and the length of the single side stretch is 53 mm;
The purpose of the card slot drawing is that when there are heavy objects on the platform, the two card slots and the M5 screw can be lifted in a 3-point manner, so that it can withstand heavier weight without damage;
In use, it is only necessary to tighten a screw to adjust;
3. The dual-hand-held mounting plate is designed with a vertical and horizontal mounting slot for camera housing accessories. The four horizontal slots on the board can be mounted on the front or the back as needed, adapting to different specifications of the camera equipment, with the shutter extension rod.
There are two M5 screw holes on one end of the board. If the customer is worried that the left and right screws are not tight, you can install two screws.
Upgrade Version(Black and red 2colors):
Material: Aluminum alloy
Color: Black / Red
Processing technology: CNC machining / CNC
Aluminum alloy surface process: Anode blasting oxidation
Product size: 60 * 70 * 75mm
Product gross weight: 100g
Suitable for diving dual-handed / suitable for GOPRO all series / SJcam / Xiaoyi and other sports cameras, for Nikon for Canon Micro SLR and other waterproof cases.
Features:
1. All aluminum alloy material, strong and light, strong, corrosion resistance, stable performance;
2. New design, simple structure, easy assembly, stable connection, small size;
3. High-end anode sand blast oxidation, and different colors can be customized according to personal preference;
4. The principle of lever is used to realize the function of triggering the photography shutter without holding the handle, making triggering easier and saving time and effort.
5. Maximize the use of space and maximize the length of all chutes, so that you can adjust the position back and forth, left and right, and up and down to meet different camera models.
6. The positions of the 1-A, 1-B, and 5-A sliding grooves on the fixing block ① and the connection block ③ and the sliding block ⑤ can be adjusted separately, so that the position of the accessories can be adjusted for reasonable installation.
Working principle:
1.Using the principle of lever, move the movable block ② the tail, the movable block ② is pushed down at the front end, because the movable block ② is equipped with a spring at the front end, the movable block ② will rebound, and the movable block ② movement drives the connection block ④ and the sliding plate ⑤, fixed Column ⑥ is in contact with the camera shutter button, thereby achieving the purpose of not directly pressing the shutter.
2. When in use, connect the fixing block ① to other accessories and fix it, then adjust the fixing block ① the left and right positions and then adjust the connection plate ③ the front and back position and finally adjust the sliding block ⑤ the up and down position to match the camera shutter position, which can meet Used by different models of cameras.
Note: We have our own factory, and we can customize LOGO and products with different colors. Please contact our customer service for details. Thank you.
Standard Version:
Product size: 15 * 70 * 60mm / 4.52 * 2.75 * 2.36''
Material: Aluminum alloy
Processing technology: CNC machining
Weight: 120g, plus box 170g
Color: black / red / blue / pink / purple / Gold
Surface treatment: anodizing
Application:
This extended shutter trigger level is suitable for Meikon.
It is suitable for SEAFROGS non-reflective camera housings, such as A6000 series, RX100 series, A5000 series, suitable for Olympus camera housing TG4, TG5 and so on.
Features:
1. Shutter release trigger extends the adapter lever.
2. Made of aluminum alloy material, it is sturdy and durable.
3. Install the underwater stabilizer tray and the waterproof camera of the diving camera.
4. It is more convenient to control your shooting, especially underwater photography.
5. Applicable to GoPro, Sony, Olympus, Canon, Nikon, Panansoic, Pentax and other cameras.
6. Size: 7.2 * 11 * 5.9 cm, weight: 118 g.
Packing list:
Shutter extension bracket x 1
Hexagon screwdriver and screw set x 1![02](https://ae01.alicdn.com/kf/Hb50514815956474bae350e754ac4b947e.jpg)
![000](https://ae01.alicdn.com/kf/H5a1db43b80954e80b3840b8d0e25596an.jpg)
![IMG_0141](https://ae01.alicdn.com/kf/H7bf32a21e72c428e9f9282226f5af6d6o.jpg)
![IMG_0158](https://ae01.alicdn.com/kf/Hf527be6907654e408239e1f0f7ac3f706.jpg)
![SIZE](https://ae01.alicdn.com/kf/He0d1d1c59f5146699935fcd7896aa4cem.jpg)
![1(1)](https://ae01.alicdn.com/kf/H96f9205af28e42ceb856d69460f24154F.jpg)
![000(1)](https://ae01.alicdn.com/kf/H6e3255b1cb2d4838919f6008e496102fg.jpg)
![IMG_0697(1)](https://ae01.alicdn.com/kf/H6133402c6beb4f92af07ab0af92f0bf3u.jpg)
![IMG_0694](https://ae01.alicdn.com/kf/He3ae3c90b1a44a1ca7d05d6cd90f06079.jpg)
![000](https://ae01.alicdn.com/kf/H2777b157f1ab4ccd8d149ef36894a755V.jpg)
![000(1)](https://ae01.alicdn.com/kf/H7aad24bf29d94f02a2b984243e250b03g.jpg)
![IMG_0759(1)](https://ae01.alicdn.com/kf/H3e38b915f4884e6aac29bb4c5acebefbF.jpg)
![IMG_0775](https://ae01.alicdn.com/kf/H78d674747b424db98b48083f713e6432B.jpg)
![000(1)](https://ae01.alicdn.com/kf/H00557fbe436e4ec5a7b8a0a89642d1db1.jpg)
![IMG_0754](https://ae01.alicdn.com/kf/H15776379882f4d99a584359b5d9021958.jpg)
![22222(1)](https://ae01.alicdn.com/kf/Hc146f2b08b584dbda5ec2114b3d6fca0f.jpg)