Features:
This super powerful patch can repair tire punctures.
It's small and lightweight, easy to carry and use.
6 patches and 1 abrasive sheet in each package.
Self-adhesive patch, no glue required.
Specifications:
Name: Bike Tire Patch Kit
Material: rubber
Vantages: Portable, Strong Adhesion, Easy to Use
Tip:
This product is self-adhesive and can be pasted after tearing off the backing paper. Easy to operate, no touch. Has good water resistance.
Instructions:
Use the glue-free fast tire patch/tire patch to repair the tire:
1.Remove the tire from the bicycle and twist the nut on the tire to allow the inner tube to leak.
2.Pry the edge of the casing with a tire spoon (tire rod).
3.After fixing the position of the tire with a tire tweezers, grasp the tire by hand, insert the other tire rod into the other end of the gap of the tire, and widen the gap of the tire to remove the tube.
4. Put your hand into the gap of the tire and take out the tube.
5.Prepare a small bowl of water, squeeze the inner tube into the water, and check the leak. Observe that if there is a leak in one place, bubbles will appear in the basin.
6.Clean the perimeter of the leaking hole and keep it dry. Use a sandpaper saw blade or a cooker to evenly rub the hole around the hole. The surface of the hole should be slightly larger than the film to be used.
7.Film and inner tube wound hole should be kept clean and even when applied.
8.Use the roller to roll evenly, or tap the compaction with a small hammer or a wooden hammer to make it firm and firm.
9.Wait for 20~30 minutes and you can use it. Complete cure in 24 hours.
Packing List:
6 x Patches
1 x Abrasive Sheet
1 x Box
Notes:
Due to the light and screen settings differences, the item's color may be slightly different from that shown in the pictures.
Please allow a slight size tolerance due to different manual measurement.