Multifunctional Electric Fast Knife Sharpener Wheel Diamond Automatic Sharpening Machine Kitchen Grinder Knife Machine 220V
Description:
Name: Electric knife sharpener
Voltage: 220V
Power: 60W / 50Hz
Line length: 1M
Size: 24.5 * 12 * 9.5cm
Feature:
Made of special materials. As long as the sharpener on the blade only takes a few seconds to grind through any extremely sharp tool, a dull blade (non-trimming blade) can be polished in less than half a minute.
There is no water, there is no cost of the sharpener, and the sharpener is only used at the end of milling.
Quick sharpener is a novel, convenient and practical necessity
The design is novel, the appearance is beautiful and generous, the operating room is suitable for alloy knives, cemented carbide knives, stainless steel knives, and all straight knives.
You can sharpen knives, boning knives, carving knives, fruit knives, scissors, screwdrivers
German craftsmanship
Novel, convenient, and practical, essential daily necessities for the family
High Power 60W
Faster, more convenient, easier and more fashionable
Multifunctional automatic sharpener
Quickly sharpen the knife in 5 seconds and take effect
The pictures and information are for reference only. The product will be subject to the actual product. Due to the color difference of the shooting light and different displays, there may be a little color difference between the product image and the actual product. The measurement method is manual measurement. The error of 2-3mm is normal.
Safety temperature control: When the motor has been used continuously for a long time, the motor temperature reaches
It will automatically stop after 70 degrees to protect the motor from burnout.
The sharpener wheel uses high-density brown corundum (called: emery)
Durable service life is more than 10 years.
Unique design and beautiful appearance
Simple operation, suitable for alloy knives, carbide knives, stainless steel knives,
All kinds of straight knives, it can also be used for most hunting knives
Not suitable for electric serrated knives and can protect your hands from accidental injuries
Household electric knife sharpener
Sharpening the knife without water, no damage to the knife, fast, labor-saving, and can also repair deformed knives
Multi-purpose integrated knife sharpener
Electric and fast, save time and effort
Coarse grinding i fine grinding
Can grind kitchen knives, deboning knives, meat cleavers, fruit knives, scissors, flat-blade screwdrivers
Applicable situation
Fine grinding is suitable for daily maintenance of the knife blade, and the knife after rough grinding and opening the front, and then fine grinding to remove iron swarf, to achieve the effect of sharp blade.
Instructions
Put the tool in the No. 3 and No. 4 fine grinding grooves to perform the left and right cutting edges
fine grinding. The operation is the same as rough grinding, until the cutting edge is smooth and sharp, cycle
The number of times is about 3~5 times (according to the sharpness of the blade) to complete the sharpening.
Note: At this time, the cutting edge of the knife is sharp, please do not touch the knife edge with your fingers or body.
To avoid injury, please put the knife on the knife holder or knife holder after using the knife.
Instructions:
Put the scissors into the special grinding groove for the scissors to grind, open the scissors,
Put the inner plane of the left blade of the scissors close to the straight wall of the upper part of the groove, with the blade facing the grinding wheel,
Slowly approach the scissors to the grinding wheel until the blade touches the grinding wheel. Make sure the scissors
The grinding direction is to grind from the position close to the shank to the sharp position, and then pull out
Scissors (cannot be dragged back and forth in the groove for grinding). Speed of sharpening
It is recommended to do it at 3~4cm/sec. Then operate the right edge of the scissors according to the above steps,
Circularly sharpen the left and right edges until the scissors are sharp
Instructions:
Put the flat-blade screwdriver into the special grinding hole for grinding
(The screwdriver should not be too big, it should be able to extend into the hole size)
Slowly extend the screwdriver gently toward the grinding wheel until it touches the grinding wheel
Perform grinding. Screwdriver grinding can only smooth out the word mouth.
Do not insert the screwdriver forcefully to avoid damage to the machine and personal injury.
Instructions
This machine is equipped with two chip loading cabinets. After sharpening, the chips generated can be
Take it out through the chip loading cabinet at the back of the sharpener,
Convenient. When cleaning,
Just pull out the debris cabinet, clean the debris, and put it back into the machine.
Wear debris should be cleaned up in time. It is recommended to clean after each grinding to avoid
Too much wear debris accumulates in the fuselage.
Hello color
-Two colors, different choices
Important safety tips:
In order to prevent fire, electric shock, and personal injury during the use of electrical appliances, the following should be noted:
1. Please read this manual carefully before using this machine for the first time.
2. Please make sure that the voltage used is consistent with the rated voltage of the machine.
3. To prevent electric shock, please do not immerse the wire, plug or the machine into water or other liquids.
4. Before sharpening the knife, please remove grease and adhesions from the knife.
5. Grinding does not need to use any lubricating oil, water or abrasives, otherwise it may cause fire, electric shock or endanger personal safety.
6. It is not possible to sharpen blades, knives with sharp corners or serrated knives.
7. When cleaning the wear debris, please turn off the power and pull the plug out of the machine.
8. When not using the machine, please pull out the plug from the socket.
9. Do not place the machine near electric stoves and hot ovens.
10. The use of accessories other than this machine may cause personal injury. It is strictly forbidden to use this machine for other purposes.
11. When the wire or plug is damaged or malfunction occurs during use, please send the machine to a qualified repair shop for inspection and repair.
12. Children, mental patients or persons with intellectual disabilities, please do not use this machine, so as not to cause bodily harm.
13. This machine is only suitable for indoor use.
For better results:
1. Before grinding, the knives should be cleaned and wiped dry.
2. The machine is placed on a clean, hard and flat surface for grinding.
3. When grinding, control the grinding force and drag the tool speed evenly, drag the tool
Please keep your direction.
4. Alternate left and right grinding grooves to grind the left and right edges of the tool
(Except for scissors and screwdrivers)
Replace the grinding wheel
1. With the bottom facing up, pull out the 4 suction cups at the bottom
2. Remove 8 screws from the cross, as shown in the figure
3. Open the casing of the machine to expose the machine components
4. The adjustable wrench is stuck with the hexagonal nut, fingers
Gently turn the grinding wheel, remove the nut to replace the grinding wheel
Notice:
There is a spring plate on each side of the grinding wheel, pay attention when removing the nut, don't miss it.