300M 100LV Shock Rechargeable And Full Waterproof Dog Training Collar H183DR With LCD Display Support 3 Dogs 998DR big upgrade
Nylon Belt + Transmitter Backlight Screen
Screen Backlight Remote Pet Dog Training Electronic Collar Rechargeable 100 Levels Shock and Vibration Swimming waterproof
we test them one by one before shipping to sure all work well with retail box
Support 3 Dog Receiver Collars,
Compatible: 998D 998DR H188 PD520S PD520 PD520C PD265B PD265BL Training Collars System
Features:
1 Waterproof Receiver: your pet can swim or walk in the rain with it
2.Rechargeable: Rechargeable remote and Rechargeable receiver
3. Stable Levels: you can adjust the level of Vibration mode and shock mode from 1-100.(it don&39;t work with 000)
4 Four Training mode: Shock/Vibration/Light/Sound
5.Three Channels: Choose channel from max 3 Receivers with one remote
6.Auto Power Save: The Remote and Receiver will go into standby mode if no operaiton within 5 mintues
Tips
1. Please charge before first using
2. Eliminate one misbehavior or teach one obedience command at one time, if the training get too fast, your pet may become confused and repel
3.Before using the sock mode to your pet, you shold try vibration to your pet first.
4.Observing the dog&39;s reaction, make sure the training intensity intensity not too much.
5.Check your dog&39;s skin, don&39;t hurt it by shock.
Pair the remote and receiver
1.Press the shock button or vibration button to turn on the remote
2. Choose a Channel 1 or 2 or 3 by press the 1/3 button
3.Press the vibration button, adjust the level by press up/down button, make sure the level above001
4. Press the power button of the receiver, you hear a sound like Bee~, and the power light is on.
5. Press the vibration button within 10s after the sound Bee~, you can hear a sound Bee~ again, that means the pairing successful
6. If you Have 2 or 3 Receivers, just choose the different channel and pair as above same steps.
Note: Please remember the channel you choose to pair, if you use another channel without pair, you can&39;t control the receiver.
Please charge the remote and the receiver before first use.
Charge the Remote:
1. Plug the cable to the charging hole
2. Connect the usb charge adapter and plug it into outlet
3. The indicator light will be on; after charge fully, the indicator light will be off.
Charge the Receiver:
1. Open the rubber cover of the receiver&39;s charging hole
2.Plug the cable into the charging hole
3.Connect the usb charge adapter and plug it into outlet
4.The Power light will be on; after charge fully, the power light will be off
Test the Training Collar set( after paired successfully)
Test the Shock function
Take out the test bulb and put it on the Receiver&39;s contact point press the shock button(make sure the level above 001) the test bulb will be on
Test the vibration funciton
Press the Vibbration button(make sure the level above 001) the receiver will vibrate
Test Sound Function and light function
Press the sound/light button, don&39;t adjust the level, the receiver sound Bee~ or flash light. It&39;s 2 in1 button, you could switch the sound or light mode as bellowing step: press and holding the button, don&39;t release, then press the 1/3 button(Channel button), you could find the mode switching in the screen.
How to wear the receiver to you pet
1. put the receiver on don&39;t neck
2. The contact point reach to the skin of dog, you need to choose the suitable metal screw cap.
3. Adjust the belt collar , make your dog comfortable
FAQ
Q:The Length of the nylon belt collar?
A: The lenth of the collar is 27.5IN (70CM)
Q: How weight dogs does this training collar suits for?
A:We suggest above 20lb.
Q: Is the receiver waterproof
A: Yes, it&39;s totally waterproof, yur dog can swim with it.
Q: How long does my dog get training every time?
A:10-15 Min.
Q what should I do if the training collar set don&39;t work?
A:1. Check the battery power of the remote and receiver, if low battery, charge them
2.Check the Level, if you choose vibration mode or shock mode, adjust to above 001
3. Check the Receiver, if you don&39;t turn it on, press the powe button of the receiver.
4. Check the channel, if you choose the different channel, press 1/3 button to adjust
5. Repair the remote and the receiver.
6. Check the metal screw cap if they are too short, change to install the longer cap
Frequence:433.825Mhz
Transmitter: 3.7v 550ma Lip
Receiver:3.7V 550ma Lip
2. R