Features:
Lightweight 4 pieces/setof aluminum heat sinks with adhesive backing strip to stick firm
With thermal transfer peel-and-stick tape,that allow for easy installation on to your board.
Help keep your Pi cool while overclocking
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc.
Installation Instructions:
-Make sure the chip modules are free from dirt and grease.
-Peel the protective liner off on the base of the heatsink.
-Apply the heatsinks to the corresponding chip modules and apply firm pressure.
One Set Package Includes:
1 Piece - 20mm x 20mm x 6mm aluminum heat sink
2 pieces-11mm x 11mm x 5mm aluminum heat sinks
1 piece - 8.8mm x 8.8mm x 5mm aluminum heat sink
The price is for 10 sets, total 40pcs
Note:
- The Pi does not include.