Wireless 24V/36V Single/Double Drive board System Double/Four Wheel Scooter Skateboard Controller
Model
Two-wheel scooter controller, four-wheel scooter controller
Single drive control board
Rated voltage: 24V, 36V, 48V
Current: 10A ~
Power: 350W scooter motor
Drive mode: Single system / dual system driver
Maximum speed: 20KM / H
Protection: overvoltage, undervoltage, over temperature, stall, CW \ CCW, speed control function
Sensing mode:Hall
Carrying weight: ≤ 120KG
Applications: Scooters, wheelbarrows, twists and turns, balance cars and so on
Input Voltage: 6S/ 7S/ 10S LIPO. defaulted is for 6S. (It Can not be for all voltage please lease massage of which Voltage you need when making order )
Please note that this control modula have hub motor version and for normal brushless motor version.(like 5065, 5055, 6354,6364,6374...motors)Max power out put 2600W. (1300W each motor)
How to change the input voltage.
Wireless Controller Operating Instructions:
1. Controller Start Way:The controller switch button has two lines , plug in this switch. When the Controller is powered, press the switch, hear the sound:"drop", the control board flashing red light, indicating that the control board has been activated. Close the control board as above, press again is ok.
2. Control Board and The Motor Connection Way:motor with rubber head of the three thick line is the power cord, five side by side with the thin line is the Hall sensing line. For ease of operation, this controller setting is the dual drive mode. Only connect the three thick wires on the motor and the driver board respectively(here the connection order is random), there is no need to connect five thin wires (Holzer wire), and the motor of the remote controller can achieve starting and stopping smoothly.
3. The five thin wires (Hall line) on the motor are uesd to connect to other controllers if you need it later. If you need thin wires and you can use it. Even if you do not use thin wires (Hall line), the the benefits of this controller are that the controller board also work very good, more convenient to use, the failure rate is low.
4. Suggestion: please do not connect the thin wires (Hall line) when you test. if the motor is choppy or turn when the test start, please exchange and connect two of the three power lines.
Note: When the controller is on the power and test, do not touch the front of the controller board with more metal and do not touch with the above, it is easy to short circuit and burned the control board.
Please do not let the front of the circuit board components with the metal or liquid, it also can easily lead to circuit board short circuit.
5. Remote control operation:Turn on the switch, press the forward and backward switch button, the remote control and the controller automatically match the connection. Push the slide button to accelerate the motor. After pulling the slider, the motor deceleration brake.
Here are two speed switching.
There are two directions forward and reverse switching.
Remote control: rechargeable, connected to ordinary cell phone charging cable is ok.
6. Wireless remote control and control board connection operation:
1) Control board connected to the power, at first, please open control board start button, and see the control panel flashing red, that the control panel has been activated.
2) And then open the remote control switch on the remote control, at the same time, press the forward and backward switch button, the remote control light flashes, the remote control has been opened, under normal circumstances when the remote control and control panel is automatic Matched well connected, no need to connect again to control the remote control.
7.Connect mode: After the key of both of control panel and remote control is open, please let the remote control close to the control panel, and at first, press the connect button the control panel, and then press the connect button on the remote control, then the light on the control panel changes quickly flashing into a regular flashing. It prove that the connection is success.