Emax Simonk Series 12A 20A 30A 2-3S ESC Speed Controller Built-In BEC
Emax Simonk Series 12A:
Brand Name: Emax
Item Name: Simonk Series ESC
Current: 12A
Input: 2-3S LiPo
Based on Simon K firmware, further optimized to perfect drive performance.
Low-voltage protection, over-heat protection and self-check functions.
Separate power supply for MCU and BEC, enhancing the ESC&x27;s ability of eliminating magnetic interference.
Parameters of the ESC can be set via program card or transmitter.
Throttle range can be set to be compatible with different receivers.
Equipped with built-in BEC.
Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.
Note: this ESC can not work with pixhawk flight controller.
Emax Simonk Series 20A:
Simonk firmware
With low voltage, overheat protection and self detection function
Max.support rotation speed: 210,000rpm/2-pole; 70,000rpm/6-pole; 35,000rpm(12-pole)
MCU and BEC with independant regulator
Parameter adjustable by programer or remote controller
Throttle stroke adjustable, compatible with different receivers.
Built-in linear BEC or switch mode BEC
Continuous current: 20A
Burst current(10s): 25A
Li-Po battery: 2-3S
Dimension: 55*28*7mm
Weight: 28g
BEC mode: Linear
BEC Output: 5V 2A
Programmable
Package size: 16 * 11 * 1cm / 6.4 * 4.4 * 0.4in
Package weight: 37g / 1.3 oz
Emax Simonk Series 30A:
Simonk firmware
With low voltage, overheat protection and self detection function
Max.support rotation speed: 210,000rpm/2-pole; 70,000rpm/6-pole; 35,000rpm(12-pole)
MCU and BEC with independant regulator
Parameter adjustable by programer or remote controller
Throttle stroke adjustable, compatible with different receivers.
Built-in linear BEC
Suitable for F450 helicopters/Aircraft or Multi rotor helicopter
Constant Current: 30A
Li-Po battery: 2-3S
BEC mode: Linear
BEC Output: 5V 2A
Dimension: 55*28*7mm
Weight: 28g
Package weight:38 g