CZE-15A 15W stereo PLL FM transmitter broadcast radio station
Introduction:
This FM stereo transmitter can be used for factories, schools, supermarkets, farms, Office space or create your own radio station.
CZE-15W using advanced modulation system and built-in PLL frequency, audio pre-emphasis, limiter, and low-pass filter circuit.
The Control circuit board design and amplifier design to reduce noise, so sound quality is even better.
Well-shielded, compact structure, small size, generous appearance, plug and play, very easy to use.
Specification:
Phase Lock Loop (PLL) System
Easily choose your frequency LCD and buttons
Freq range :87.5MHz~108MHz
RF output impedance: 50 Ohm (BNC Type antenna output)
RF output power:15W
Reference range: 10Km -18Km (A barrier-free environment)
Ripple or harmonic waves: <= -60dB
SNR: More than 60dB
Tuning Step : 100khz
Stability of Frequency: ±5ppm Less than 10ppm ( better system)
Freq. Response: -55dB(100~5000Hz); -45dB(5000 ~ 15000Hz )
Audio Input Connector: 3.5mm headphone connector
Microphone jack; it can be connected wih the microphone
Stereo channels crosstalk: -50dB
Audio frequency response: 20 to 15000Hz
Audio distortion: Less than 2%
Modulation: 15%
Power supply voltage: DC 10-14V (12V recommended)
Operating current: Less than 3A
Dimensions: 190mm (L) * 125mm (W) * 45mm (H)
Note:
* Connect antenna first ,then connect the power supply, otherwise, transmitter will be burned out.
* Select an unused FM station in your area.
* Packing not included power supply and Antenna.
Packing included:
CZE-15A 15W FM Transmitter (color: silver) x1