0.1W/ 1W stereo pll FM transmitter radio broadcast +TF slot +Bluetooth High Equipment Kit
-CZE-01B host + antenna + power supply + audio cable
![](https://ae01.alicdn.com/kf/HTB176S1QXXXXXXnXpXXq6xXFXXXj/200214132/HTB176S1QXXXXXXnXpXXq6xXFXXXj.jpg?size=283939&height=900&width=900&hash=8ec9a75ca41e671ea66f23d03735411b)
Functions:
1. The power can adjust to 0W to 1W and there are 10 levels totally.
2. Pre-emphasis switching: Support to adjust to Pre-emphasis 50US/75US.
3. Stereo/mono: Support stereo/mono switching.
4. The microphone priority function: When this function is opened and there is MIC signals, the machine will automatically reduce to input the sound of master volume and highlight the voice of MIC.
5. No-signal automatic power off function: According to different needs, users can turn on/off this function or change the time of no signal automatic power off.
6.when using the battery, the LED panel will automatically reduce to the minimum brightness after 30 seconds to reach energy-saving purpose.
7. Intelligent storage: Transmitter will save the transmitting power and frequency of the last power-off.
1. The front panle
![](https://ae01.alicdn.com/kf/HTB1kY9PQXXXXXbxXFXXq6xXFXXXl/200214132/HTB1kY9PQXXXXXbxXFXXq6xXFXXXl.jpg?size=52453&height=279&width=533&hash=8cdebc78239ccf10df1f13495b91cf25)
1.LED panel
2.Volume
3.On/Off,Play/Pause
4.Decrease/Previous
5.Increase/Next
6.Power Regulation
7.Microphone Volume
8.Audio Source Switching
9.Frequency Regulation
10.Short Press: Stereo/Mono,Long Press: Pre-emphasis
2. The rear panle
![](https://ae01.alicdn.com/kf/HTB1eWypQXXXXXXPapXXq6xXFXXXN/200214132/HTB1eWypQXXXXXXPapXXq6xXFXXXN.jpg?size=50657&height=230&width=498&hash=51aa47c379ff604e64a8701712fc9e97)
1.12V Power Input Interface
2.TF Card Slot
3.Left Sound Channel Input
4.Right Sound Channel Input
5.MIC Input Interface
6.Data Communication Interface
7.Antenna Interface
Technical parameters
1 | Working Voltage: | 12V | 9 | Transmitted Power: | 0~1W (10 levels totally) |
2 | Working Current: | <0.4A | 10 | Harmonic Wave,Noise Wave: | Greater than or equal to 60 dB |
3 | Frequency Range: | 76~108MHZ | 11 | Audio Distortion: | Greater than or equal to 0.2% |
4 | Stepped Frequency: | 100KHZ | 12 | Frequency Modulation Deviation: | +-75KHZ |
5 | Working Temperature: | -10~45 | 13 | Signal-Noise Ratio: | Greater than or equal to 60dB |
6 | Acoustic Frequency Response: | 50HZ~15000HZ | 14 | Pre-Emphasis: | 50/75US Switchable |
7 | Stereo Crosstalk: | Greater than or equal to 40dB | 15 | Antenna Impedance | 50 Ohm |
8 | Audio Input: | 15dBV |
|
|
|
NOTE:
Connect antenna first ,then connect the power supply, otherwise, transmitter will be burned out.
Select an unused FM station in your area ,adjust any FM Radio to the signal that your are broadcasting on.
Package included:
CZE-01B FM Transmitter High equipment version x1 (Included TF card slot, battery and Bluetooth function.)
Power supply x1 (US or Eu plug)
TNC Rubber antenna x1
3.5mm stereo audio cable x1
CZE-01B extra Battery x1