32Bit KISS FC Flight controller For Quadcopter Racing FPV Drone QAV210 QAV-X R 220 260
Notes:
The software of the KISS flight controller is Betaflight firmware, It dose not support the native software. The native software can not be unlocked.Please download the Betaflight firmware. And the Betaflight firmware is different from the native software. We hope that you can understand it. We are factory of developing, producing and selling of one-stop service, welcome to wholesale, customization.
All of our products have been checked by our technical team strictly before shipping out to you. Please rest assured to buy it.
This flight control is suitable for professional players.And we do not provide any technical support. Please research it by yourselves. For beginner, please take care about it.
Here are some tips for downloading the Betaflight software.
1. Please go to Google store.
2. Enter the "Betaflight" and download the software.
3.Please install driver and use it correctly.
this is MOY kiss flight control ,not original
Note: Removing conflicting drivers
SUPPORTED COPTER TYPES:
- Tri
- Quad +/x
- Hexa +/x
SUPPORTED RX TYPES:
- PPM Sum
- Spektrum Sat. (serial / DSM2 & DSMX)
- Futaba / Taranis SBUS
- Jeti ExBus
- Graupner SumD / SumO
- MultiPlex
This flight control advice is applicable to professional flying hands, not to provide any technical support, please study the players themselves. The novice should buy carefully.
A modern more simplified 32bit Flightcontroller, the KISS FC It includes a complete own Flight Control Firmware development who get rid of some old ballast. This took some time, but the result is very pleasing.
The idea was to simplify some things and due to intensive long term testings of some pretty good Pilots we where able to optimize the code to a point where you hopefully get your quad in the air quite quick. Normally you just need to choose your Airframe in the GUI and are able to fly (at least with KISS ESC), otherwise you can download presets of well knowen Pilots for given configurations and of course can tweak the PID yourself over the GUI.
The software setup side is reduced as far we can, many things are allready taken in to account for you, if you bring some solid soldering skills you should be able to build your quad pretty quick.
A new feature is also the inbuild telemetry, in combination with our 32bit ESC line its possible to show the live telemetry data via OSD on your FPV live feed or in the KISS FC GUI
This way you get usefull informations like the Voltage of your battery, current consumption, ESC temperature and motor RPM.![](https://ae01.alicdn.com/kf/HTB1_CbbgEFWMKJjSZFvq6yenFXaB.jpg?size=309045&height=600&width=800&hash=cd018d67f42fb1a2ab4866ef8c84df48)
![](https://ae01.alicdn.com/kf/HTB1Q8gvSXXXXXaUXVXXq6xXFXXXx.jpg)
- Classic RX with single channel output
![](https://ae01.alicdn.com/kf/HTB1iNw5SXXXXXXuXpXXq6xXFXXXi.jpg)
![](https://ae01.alicdn.com/kf/HTB1t5.0SXXXXXbCXpXXq6xXFXXXD.jpg)
![](https://ae01.alicdn.com/kf/HTB1iNw5SXXXXXXuXpXXq6xXFXXXi.jpg)
![](https://ae01.alicdn.com/kf/HTB1PzkISXXXXXc.XFXXq6xXFXXXT.jpg)
![](https://ae01.alicdn.com/kf/HTB16bmMd3vD8KJjSsplq6yIEFXaP.jpg?size=159865&height=1000&width=1000&hash=f2184c062ed761effbdd1db1e775c24f)